{"product_id":"2-x-nylon-drain-plug-1-inch-25-4-mm-hole-screw-retained-for-boat-kayak-bilge-transom","title":"2 x Nylon Drain Plug 1 Inch 25.4 mm Hole Screw Retained for Boat Kayak Bilge Transom","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eNylon drain plug, a direct replacement part for boat transoms, livewells and bilge drains with a 1 inch (25.4 mm) hole. The pack is two plugs, each 2.85 inch (72.4 mm) long and 2.0 inch (50.8 mm) wide outside, retained by two screws through the flange.\u003c\/p\u003e\n\n\u003cp\u003eThe plug is a threaded nylon body with a rubber O ring under the head. You seat it in the 1 inch (25.4 mm) hole, screw the flange down on two screws and the O ring does the sealing. No tools beyond a screwdriver, and no sealant needed if the hole edge is clean.\u003c\/p\u003e\n\n\u003cp\u003eNylon is the right material here because it will not corrode, it will not seize in the hole after a season in salt water, and it flexes enough to take the screw load without cracking. The O ring is the only part that wears, and it is cheap to replace.\u003c\/p\u003e\n\n\u003cp\u003eThe plugs fit canoes, kayaks, dinghies, Skeeter boats, sailing boats and fishing boats, and the same 1 inch hole is used on livewells, water tanks, coolers, drain valve outlets and bilge drain ports. Measure the hole before ordering, because a 1 inch (25.4 mm) hole and a 1 inch threaded fitting are not the same thing.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth style=\"text-align:left;border-bottom:1px solid #ddd;padding:6px\"\u003eSpecification\u003c\/th\u003e\n\u003cth style=\"text-align:left;border-bottom:1px solid #ddd;padding:6px\"\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px\"\u003eCondition\u003c\/td\u003e\n\u003ctd style=\"padding:6px\"\u003eNew \/ New with tags\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px\"\u003eType\u003c\/td\u003e\n\u003ctd style=\"padding:6px\"\u003eScrew retained drain plug\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"padding:6px\"\u003eNylon body with rubber O ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px\"\u003eQuantity\u003c\/td\u003e\n\u003ctd style=\"padding:6px\"\u003e2 plugs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px\"\u003eLength\u003c\/td\u003e\n\u003ctd style=\"padding:6px\"\u003e2.85 inch \/ 72.4 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px\"\u003eOutside Width\u003c\/td\u003e\n\u003ctd style=\"padding:6px\"\u003e2.0 inch \/ 50.8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px\"\u003eHole Diameter\u003c\/td\u003e\n\u003ctd style=\"padding:6px\"\u003e1.0 inch \/ 25.4 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px\"\u003eMounting\u003c\/td\u003e\n\u003ctd style=\"padding:6px\"\u003eTwo screws through the flange, screws not included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px\"\u003eSeal\u003c\/td\u003e\n\u003ctd style=\"padding:6px\"\u003eRubber O ring under the head\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px\"\u003eColour\u003c\/td\u003e\n\u003ctd style=\"padding:6px\"\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px\"\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd style=\"padding:6px\"\u003eTaiwan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px\"\u003eNet Weight\u003c\/td\u003e\n\u003ctd style=\"padding:6px\"\u003e53 g including packaging\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px\"\u003ePack Size\u003c\/td\u003e\n\u003ctd style=\"padding:6px\"\u003e155 mm x 105 mm x 40 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px\"\u003ePack Size In Inches\u003c\/td\u003e\n\u003ctd style=\"padding:6px\"\u003e6.10 in x 4.13 in x 1.57 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px\"\u003eWarranty\u003c\/td\u003e\n\u003ctd style=\"padding:6px\"\u003e3 year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eSizing Guide\u003c\/h2\u003e\u003ctable style=\"width:100%;border-collapse:collapse\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth style=\"text-align:left;border-bottom:1px solid #ddd;padding:6px\"\u003eMeasurement\u003c\/th\u003e\n\u003cth style=\"text-align:left;border-bottom:1px solid #ddd;padding:6px\"\u003eImperial\u003c\/th\u003e\n\u003cth style=\"text-align:left;border-bottom:1px solid #ddd;padding:6px\"\u003eMetric\u003c\/th\u003e\n\u003cth style=\"text-align:left;border-bottom:1px solid #ddd;padding:6px\"\u003eWhy It Matters\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px\"\u003eHole inner diameter\u003c\/td\u003e\n\u003ctd style=\"padding:6px\"\u003e1.0 inch\u003c\/td\u003e\n\u003ctd style=\"padding:6px\"\u003e25.4 mm\u003c\/td\u003e\n\u003ctd style=\"padding:6px\"\u003eThe plug body has to drop into this hole\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px\"\u003eOverall length\u003c\/td\u003e\n\u003ctd style=\"padding:6px\"\u003e2.85 inch\u003c\/td\u003e\n\u003ctd style=\"padding:6px\"\u003e72.4 mm\u003c\/td\u003e\n\u003ctd style=\"padding:6px\"\u003eClearance behind the flange\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px\"\u003eOutside width\u003c\/td\u003e\n\u003ctd style=\"padding:6px\"\u003e2.0 inch\u003c\/td\u003e\n\u003ctd style=\"padding:6px\"\u003e50.8 mm\u003c\/td\u003e\n\u003ctd style=\"padding:6px\"\u003eFlange footprint on the hull or tank\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px\"\u003eScrew spacing\u003c\/td\u003e\n\u003ctd style=\"padding:6px\"\u003eTwo screws\u003c\/td\u003e\n\u003ctd style=\"padding:6px\"\u003eThrough the flange\u003c\/td\u003e\n\u003ctd style=\"padding:6px\"\u003eScrews are not in the box\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eCompatible Boats And Drains\u003c\/h2\u003e\u003ctable style=\"width:100%;border-collapse:collapse\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth style=\"text-align:left;border-bottom:1px solid #ddd;padding:6px\"\u003eWhere It Fits\u003c\/th\u003e\n\u003cth style=\"text-align:left;border-bottom:1px solid #ddd;padding:6px\"\u003eTypical Use\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px\"\u003eCanoes and kayaks\u003c\/td\u003e\n\u003ctd style=\"padding:6px\"\u003eHull drain at the stern\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px\"\u003eDinghies and tenders\u003c\/td\u003e\n\u003ctd style=\"padding:6px\"\u003eTransom drain plug\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px\"\u003eSkeeter, sailing and fishing boats\u003c\/td\u003e\n\u003ctd style=\"padding:6px\"\u003eTransom and deck drains\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px\"\u003eLivewells and bait tanks\u003c\/td\u003e\n\u003ctd style=\"padding:6px\"\u003eDrain valve outlet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px\"\u003eWater tanks and coolers\u003c\/td\u003e\n\u003ctd style=\"padding:6px\"\u003eDrain port\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px\"\u003eBilge drain ports\u003c\/td\u003e\n\u003ctd style=\"padding:6px\"\u003eHull drain below the waterline when afloat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\u003ctable style=\"width:100%;border-collapse:collapse\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth style=\"text-align:left;border-bottom:1px solid #ddd;padding:6px\"\u003eComponent\u003c\/th\u003e\n\u003cth style=\"text-align:left;border-bottom:1px solid #ddd;padding:6px\"\u003eDetail\u003c\/th\u003e\n\u003cth style=\"text-align:left;border-bottom:1px solid #ddd;padding:6px\"\u003eQty\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px\"\u003eNylon drain plug, 1 inch hole\u003c\/td\u003e\n\u003ctd style=\"padding:6px\"\u003eThreaded body with rubber O ring\u003c\/td\u003e\n\u003ctd style=\"padding:6px\"\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px\"\u003eMounting screws\u003c\/td\u003e\n\u003ctd style=\"padding:6px\"\u003eNot included, two per plug, buy separately\u003c\/td\u003e\n\u003ctd style=\"padding:6px\"\u003e0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px\"\u003eSealant\u003c\/td\u003e\n\u003ctd style=\"padding:6px\"\u003eNot required if the hole edge is clean\u003c\/td\u003e\n\u003ctd style=\"padding:6px\"\u003e0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFitting Notes\u003c\/h2\u003e\u003ctable style=\"width:100%;border-collapse:collapse\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth style=\"text-align:left;border-bottom:1px solid #ddd;padding:6px\"\u003eStep\u003c\/th\u003e\n\u003cth style=\"text-align:left;border-bottom:1px solid #ddd;padding:6px\"\u003eAction\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"padding:6px\"\u003eMeasure the hole inner diameter and confirm it is 1 inch (25.4 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"padding:6px\"\u003eClean the hole edge and take off any old sealant or rust\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px\"\u003e3\u003c\/td\u003e\n\u003ctd style=\"padding:6px\"\u003eCheck the O ring sits in its groove and is not twisted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px\"\u003e4\u003c\/td\u003e\n\u003ctd style=\"padding:6px\"\u003eDrop the plug into the hole\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px\"\u003e5\u003c\/td\u003e\n\u003ctd style=\"padding:6px\"\u003eLine the flange up and start both screws by hand\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px\"\u003e6\u003c\/td\u003e\n\u003ctd style=\"padding:6px\"\u003eTighten evenly until the O ring just starts to compress\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px\"\u003e7\u003c\/td\u003e\n\u003ctd style=\"padding:6px\"\u003eFill the bilge or tank with a little water and check for weeping\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px\"\u003e8\u003c\/td\u003e\n\u003ctd style=\"padding:6px\"\u003eRe tighten after the first trip if the nylon has settled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eCare And Maintenance\u003c\/h2\u003e\u003ctable style=\"width:100%;border-collapse:collapse\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth style=\"text-align:left;border-bottom:1px solid #ddd;padding:6px\"\u003eInterval\u003c\/th\u003e\n\u003cth style=\"text-align:left;border-bottom:1px solid #ddd;padding:6px\"\u003eAction\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px\"\u003eEvery trip\u003c\/td\u003e\n\u003ctd style=\"padding:6px\"\u003eCheck the plug is screwed down before launching\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px\"\u003eEach season\u003c\/td\u003e\n\u003ctd style=\"padding:6px\"\u003eTake the plug out, clean the O ring groove and inspect the ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px\"\u003eEach season\u003c\/td\u003e\n\u003ctd style=\"padding:6px\"\u003eCheck the screws are not working loose in the nylon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px\"\u003eStorage\u003c\/td\u003e\n\u003ctd style=\"padding:6px\"\u003eLeave the plug out so the hull drains and the O ring does not take a set\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eCondition \u0026amp; Warranty\u003c\/h2\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth style=\"text-align:left;border-bottom:1px solid #ddd;padding:6px\"\u003eItem\u003c\/th\u003e\n\u003cth style=\"text-align:left;border-bottom:1px solid #ddd;padding:6px\"\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px\"\u003eCondition\u003c\/td\u003e\n\u003ctd style=\"padding:6px\"\u003eNew \/ New with tags\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px\"\u003eWarranty\u003c\/td\u003e\n\u003ctd style=\"padding:6px\"\u003e3 year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px\"\u003ePackaging\u003c\/td\u003e\n\u003ctd style=\"padding:6px\"\u003eSealed retail packaging\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eBefore You Buy\u003c\/h2\u003e\n\u003cul style=\"list-style:none\"\u003e\n\u003cli\u003eFits a 1 inch (25.4 mm) inner diameter drain hole\u003c\/li\u003e\n\u003cli\u003eTwo plugs in the pack, each 2.85 inch (72.4 mm) long\u003c\/li\u003e\n\u003cli\u003eOutside width 2.0 inch (50.8 mm) across the flange\u003c\/li\u003e\n\u003cli\u003eScrew retained, two screws per plug, screws not included\u003c\/li\u003e\n\u003cli\u003eRubber O ring under the head does the sealing\u003c\/li\u003e\n\u003cli\u003eNylon body will not corrode or seize in salt water\u003c\/li\u003e\n\u003cli\u003eFits canoes, kayaks, dinghies, livewells, water tanks, coolers and bilge drains\u003c\/li\u003e\n\u003cli\u003e53 g with packaging, box 155 mm x 105 mm x 40 mm\u003c\/li\u003e\n\u003cli\u003e30-Day Easy Returns\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"XRmarine","offers":[{"title":"Default Title","offer_id":68119728521259,"sku":"2145","price":20.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0689\/0415\/7227\/files\/10_11638d9d-9775-461e-8ae8-75416f9f3ffd.jpg?v=1793763488","url":"https:\/\/xrmarineparts.com\/de\/products\/2-x-nylon-drain-plug-1-inch-25-4-mm-hole-screw-retained-for-boat-kayak-bilge-transom","provider":"XRmarine","version":"1.0","type":"link"}