10 Micron Fuel Filter 69J-24501-10 for Yamaha F150 F200 F225 F250 FL150 LF250
10 Micron Fuel Filter 69J-24501-10 for Yamaha F150 F200 F225 F250 FL150 LF250
Product Overview
10 micron fuel filter for the Yamaha 4-stroke outboards in the F, LF and FL ranges, the filter that takes the fine particles out of the petrol before they reach the injectors on the 150, 200, 225 and 250 HP motors. It replaces Yamaha 69J-24501-00 and 69J-24501-10, it crosses to Sierra 18-79981 and 18-79905, and one filter ships at 46 g with packaging.
Yamaha built these engines around a high pressure fuel system, and the injectors on it will not tolerate grit or water. The filter is what stands between the fuel in the tank and the most expensive parts on the engine.
A 10 micron rating means it catches particles down to ten thousandths of a millimetre, which is fine enough to protect an injector and coarse enough to flow the volume the engine needs at full throttle. Going finer clogs early, going coarser lets the wear through.
Change it on the service interval rather than on symptoms. By the time a filter is badly restricted the engine has already been running lean at the top end, and on a four stroke that shows up as a motor that will not pull full rpm rather than one that will not start.
The model list below covers the V6 four strokes from 150 to 250 HP. Check the model and year against the table, because the same 150 badge covers engines from 2004 onwards and the FL150 is a different block from the F150.
Specifications & Attributes
| Specification | Detail |
|---|---|
| Condition | New / New with tags |
| Type | Fuel filter |
| Yamaha Part Number | 69J-24501-10 |
| Also Replaces | 69J-24501-00 |
| Sierra Number | 18-79981, 18-79905 |
| Micron Rating | 10 micron |
| Engine Type | 4-stroke outboard |
| Engine Series | F, LF and FL |
| Power Range | 150 HP to 250 HP |
| Quantity | 1 filter |
| Net Weight | 46 g including packaging |
| Packaging | Pack |
| Warranty | 3 year |
OEM Cross Reference
| Brand | Part Numbers |
|---|---|
| Yamaha | 69J-24501-10, 69J-24501-00 |
| Sierra | 18-79981, 18-79905 |
Compatible Engines
| Model | Power | Years | Count |
|---|---|---|---|
| F150 | 150 HP | 2004 and newer | 1 |
| F200, F225 | 200, 225 HP | 2004 and newer | 2 |
| F250, F250B | 250 HP | 2005 - 2009 | 2 |
| FL150 | 150 HP | 2006 - 2010 | 1 |
| LF200, LF225, LF250 | 200, 225, 250 HP | 2005 and newer | 3 |
What's Included
| Component | Detail | Qty |
|---|---|---|
| Fuel filter | 10 micron, 69J-24501-10 | 1 |
| O-ring or gasket | Not stated by the manufacturer listing | 0 |
| Fuel hose | Not included | 0 |
Key Features
| Feature | Detail |
|---|---|
| 10 micron | Fine enough to protect the injectors |
| Direct replacement | Fits in place of 69J-24501-00 and 69J-24501-10 |
| Cross referenced | Sierra 18-79981 and 18-79905 |
| V6 four strokes | Covers the 150, 200, 225 and 250 HP F series |
| Also the LF and FL | FL150 and the LF200 to LF250 included |
| Service item | Change on the interval, not on symptoms |
Signs The Filter Needs Replacing
| What You See | What It Means | Action |
|---|---|---|
| Engine will not pull full rpm | Filter restricted, engine running lean | Fit a new filter |
| Rough running at high speed | Fuel flow dropping under load | Fit a new filter |
| Engine stalls after a long run | Filter loading up | Fit a new filter |
| Filter overdue on the service sheet | Restriction building quietly | Fit a new filter |
| Water in the filter bowl | Contaminated fuel from the tank | Fit a new filter and check the tank |
| Hard starting after the boat has sat | Filter partly blocked | Fit a new filter and check the primer bulb |
Fitting Notes
| Step | Action |
|---|---|
| 1 | Check the model and year against the table above |
| 2 | Turn the fuel off and run the engine until it stops |
| 3 | Take the old filter off and catch the fuel in a tray |
| 4 | Check the fuel for water and dirt before you fit the new filter |
| 5 | Fit the new filter and check any O-ring or gasket seats correctly |
| 6 | Prime the system and check for leaks at the joint |
| 7 | Run the engine on muffs and check it pulls full rpm before you launch |
| 8 | Write the date on the filter body so the next service is easy |
Condition & Warranty
| Item | Detail |
|---|---|
| Condition | New / New with tags |
| Warranty | 3 year |
| Packaging | Pack |
Before You Buy
- Replaces Yamaha 69J-24501-00 and 69J-24501-10
- Crosses to Sierra 18-79981 and 18-79905
- 10 micron rating
- Fits the Yamaha F, LF and FL four stroke outboards
- 150 HP, 200 HP, 225 HP and 250 HP models
- Covers F150, F200, F225, F250, F250B, FL150, LF200, LF225 and LF250
- One filter, hoses not included
- 46 g with packaging
- 30-Day Easy Returns
- Free Worldwide Shipping
Couldn't load pickup availability
Boat Owners' Review
Before You Buy
Frequently Asked Questions
What is your refund policy?
We offer a 14-day hassle-free return on all products. Items must be unused and in original packaging. Every XRmarine part is also covered by our 1-year warranty against manufacturing defects. If something is not right, email us at info@xrmarineparts.com — replacement or full refund, your choice.
See our full Refund Policy for complete details.
How does shipping work?
Free international shipping on every order — no minimums. We operate a global warehouse network with a main distribution centre in Asia (10-20 business days). We also hold stock in regional warehouses across the United States, Germany, the United Kingdom, Australia, and Poland (opening soon) — most orders arrive in 1-3 business days within those countries and in 2-8 business days to nearby regions. Tracking included.
See our full Shipping Policy.
How do you keep prices fair?
We cut out the middlemen. XRmarine sources directly from quality manufacturers and sells at honest prices. Same OEM-quality parts, no dealership markup. Every order comes with free shipping, real expert support, and a 1-year warranty.
Learn more on our About Us page.
What payment methods do you accept?
We currently accept PayPal — a fast, secure way to pay online. Credit card payments (Visa, Mastercard, American Express) and Shopify Payments are being set up and will be available soon. We appreciate your patience.