Carburetor 69P-14301 61N-14301 for Yamaha 25 HP 30 HP 2-Stroke Outboard
Carburetor 69P-14301 61N-14301 for Yamaha 25 HP 30 HP 2-Stroke Outboard
Product Overview
Carburetor for the Yamaha 25 HP and 30 HP two stroke outboards, the fuel system part that bolts to the intake and meters fuel into the motor. It replaces Yamaha 61N-14301, 61T-14301, 69P-14301 and 69S-14301 across their suffix numbers, and one carburetor assembly ships in a 110 mm x 195 mm x 135 mm box at 608 g.
These are the small block two stroke twins: the 25 and 30 HP motors that Yamaha built through the 1990s. The same carburetor body is used across the 61N, 61T, 69P and 69S part number families, which is why one unit carries so many reference numbers.
The carburetor on a two stroke is a single barrel unit with the fuel pump driven off the crankcase pressure. When a motor starts needing choke after it is warm, four strokes at idle or dies when the throttle is snapped open, the fault is usually inside the carburetor rather than the ignition.
A clean will only get a carburetor so far. Once the throttle shaft has play in the bore or the needle does not seat, the motor will not hold a setting, and a replacement costs less than a rebuild that comes back a month later.
Fitment covers the Yamaha C30 models listed below from 1993 to 1997, plus the 25 HP motors in the same years. Check the model and serial number on the bracket before ordering, and check the suffix number on the old carburetor against the list.
Specifications & Attributes
| Specification | Detail |
|---|---|
| Condition | New / New with tags |
| Type | Outboard carburetor assembly |
| Yamaha Part Number | 61N-14301 |
| Also Replaces | 61T-14301, 69P-14301, 69S-14301 |
| 61N Suffix Numbers | 61N-14301-00, -01, -02, -03, -04, -05 |
| 61T Suffix Numbers | 61T-14301-00, -01, -02 |
| 69P Suffix Numbers | 69P-14301-00, 69P-14301-01 |
| 69S Suffix Numbers | 69S-14301-00, 69S-14301-10 |
| Engine | Yamaha 25 HP and 30 HP two stroke outboards |
| Fits | C30ELRR, C30ELRS, C30MLHS, C30ELRT, C30ERT, C30ELRU, C30ELRV |
| Years | 1993 - 1997 on the models listed |
| Country of Origin | Taiwan |
| Quantity | 1 carburetor assembly |
| Net Weight | 608 g including packaging |
| Packaging | 110 mm x 195 mm x 135 mm |
| Packaging In Inches | 4.33 in x 7.68 in x 5.31 in |
| Warranty | 3 year |
OEM Cross Reference
| Brand | Part Numbers |
|---|---|
| Yamaha | 61N-14301-00, 61N-14301-01, 61N-14301-02 |
| Yamaha | 61N-14301-03, 61N-14301-04, 61N-14301-05 |
| Yamaha | 61T-14301-00, 61T-14301-01, 61T-14301-02 |
| Yamaha | 69P-14301-00, 69P-14301-01 |
| Yamaha | 69S-14301-00, 69S-14301-10 |
Compatible Engines
| Year | Model | Engine |
|---|---|---|
| 1993 | C30ELRR | 30 HP 2-stroke |
| 1994 | C30ELRS, C30MLHS | 30 HP 2-stroke |
| 1995 | C30ELRT, C30ERT | 30 HP 2-stroke |
| 1996 | C30ELRU | 30 HP 2-stroke |
| 1997 | C30ELRV | 30 HP 2-stroke |
| 1993 - 1999 | 25 HP models, not listed by the maker | 25 HP 2-stroke |
What's Included
| Component | Detail | Qty |
|---|---|---|
| Carburetor assembly | Complete unit, 61N-14301 family | 1 |
| Mounting gasket | Not included, fit a new one with the carburetor | 0 |
| Fuel line clips | Not included, reuse the originals if they are sound | 0 |
When A Carburetor Needs Replacing
| What You See | What It Means | Action |
|---|---|---|
| Needs choke long after warm up | Pilot circuit blocked or mixture off | Clean first, replace if it returns |
| Four strokes or stalls at idle | Worn needle or float level wrong | Fit a new carburetor |
| Dies when the throttle is snapped open | Accelerator pump or jet worn | Fit a new carburetor |
| Fuel leaking from the bowl | Float valve not seating | Fit a new carburetor |
| Fouled plug and heavy fuel use | Running rich, worn throttle shaft bore | Fit a new carburetor |
| Mixture screw no longer changes the idle | Worn passages or screw seat | Fit a new carburetor |
Fitting Notes
| Step | Action |
|---|---|
| 1 | Check the model and serial number against the table above |
| 2 | Turn the fuel off and run the motor until the bowl is empty |
| 3 | Take the cowling off and note the throttle and choke linkage before removing it |
| 4 | Take the fuel line off and plug it so dirt cannot get in |
| 5 | Unbolt the old carburetor and lift it away with the old gasket |
| 6 | Clean the mounting face and fit a new gasket |
| 7 | Fit the new carburetor and reconnect the linkage, checking full travel |
| 8 | Set the idle mixture and idle speed to the manual, then run on muffs before use |
Condition & Warranty
| Item | Detail |
|---|---|
| Condition | New / New with tags |
| Warranty | 3 year |
| Packaging | Box, 110 mm x 195 mm x 135 mm |
Before You Buy
- Replaces Yamaha 61N-14301, 61T-14301, 69P-14301 and 69S-14301
- Covers the 61N suffix numbers 00 to 05
- Fits the Yamaha C30ELRR, C30ELRS, C30MLHS, C30ELRT, C30ERT, C30ELRU and C30ELRV
- Fits the Yamaha 25 HP and 30 HP two stroke outboards
- Models listed run from 1993 to 1997
- One carburetor assembly, mounting gasket not included
- 608 g with packaging, box 110 mm x 195 mm x 135 mm
- 30-Day Easy Returns
- Free Worldwide Shipping
Couldn't load pickup availability
Boat Owners' Review
Before You Buy
Frequently Asked Questions
What is your refund policy?
We offer a 14-day hassle-free return on all products. Items must be unused and in original packaging. Every XRmarine part is also covered by our 1-year warranty against manufacturing defects. If something is not right, email us at info@xrmarineparts.com — replacement or full refund, your choice.
See our full Refund Policy for complete details.
How does shipping work?
Free international shipping on every order — no minimums. We operate a global warehouse network with a main distribution centre in Asia (10-20 business days). We also hold stock in regional warehouses across the United States, Germany, the United Kingdom, Australia, and Poland (opening soon) — most orders arrive in 1-3 business days within those countries and in 2-8 business days to nearby regions. Tracking included.
See our full Shipping Policy.
How do you keep prices fair?
We cut out the middlemen. XRmarine sources directly from quality manufacturers and sells at honest prices. Same OEM-quality parts, no dealership markup. Every order comes with free shipping, real expert support, and a 1-year warranty.
Learn more on our About Us page.
What payment methods do you accept?
We currently accept PayPal — a fast, secure way to pay online. Credit card payments (Visa, Mastercard, American Express) and Shopify Payments are being set up and will be available soon. We appreciate your patience.