Carburetor Repair Kit 6G1-W0093 18-7765 for Yamaha Tohatsu Nissan Mercury 3 6 8 HP Outboard
Carburetor Repair Kit 6G1-W0093 18-7765 for Yamaha Tohatsu Nissan Mercury 3 6 8 HP Outboard
Product Overview
Carburetor repair kit for the Yamaha and Tohatsu two stroke outboards, the kit of soft parts that goes into the carburettor when it is rebuilt. It replaces Yamaha 6L5-W0093-00-00 and 6N0-W0093-00-00, it also crosses to Tohatsu 369-87122-1 and Sierra 18-7765, it fits the Yamaha 3, 6 and 8 HP models listed below, and it ships as one kit in a 153 mm x 103 mm x 33 mm box at 55 g.
The kit covers the parts that age inside a carburettor: the gaskets, the needle and seat, the float valve and the soft plugs. These are the pieces that go hard, swell or block up, and they are what a carburettor needs when it has been sitting with fuel in it.
A carburettor that needs a kit runs lean or floods. Lean shows as a motor that surges, sneezes back through the intake or only idles with the choke part out. Flooding shows as fuel running out of the overflow, a plug that keeps fouling, or a motor that will not stay running at idle.
Old fuel is the usual cause. Ethanol blend left in a carburettor over a winter draws water, the soft parts swell and the idle passages varnish up. A rebuild with a new kit is cheaper than a new carburettor and it is the fix that lasts if the tank and lines are cleaned at the same time.
Fitment covers the Yamaha 2-stroke 3 HP 1988-2002, 6 HP 1988-1996 and 8 HP 1984-2009, and the Tohatsu and Nissan 2-stroke 4, 5, 8 and 9.8 HP models listed below. Check the model or serial number on the engine plate before ordering.
Specifications
| Specification | Detail |
|---|---|
| Condition | New / New with tags |
| Type | Carburetor repair kit |
| Yamaha Part Number | 6L5-W0093-00-00 |
| Also Replaces | 6N0-W0093-00-00, 6G1-W0093-00-00 |
| Variant Reference | 6G1-W0093-00-XX |
| Tohatsu Number | 369-87122-1 |
| Sierra Number | 18-7765 |
| Application | Carburettor rebuild, soft parts and needle valve |
| Fits | Yamaha 3, 6 and 8 HP two stroke; Tohatsu and Nissan 4, 5, 8 and 9.8 HP two stroke |
| Quantity | 1 kit |
| Net Weight | 55 g including packaging |
| Pack Size | 153 mm x 103 mm x 33 mm |
| Pack Size In Inches | 6.02 in x 4.06 in x 1.30 in |
| Warranty | 3 year |
OEM Cross Reference
| Brand | Part Numbers |
|---|---|
| Yamaha | 6L5-W0093-00-00, 6N0-W0093-00-00 |
| Yamaha | 6G1-W0093-00-00, 6G1-W0093-00-XX |
| Tohatsu | 369-87122-1 |
| Sierra | 18-7765 |
Compatible Engines
| Horse Power | Years | Engine |
|---|---|---|
| 3 HP | 1988 - 2002 | Yamaha 2-stroke outboard |
| 6 HP | 1988 - 1996 | Yamaha 2-stroke outboard |
| 8 HP | 1984 - 2009 | Yamaha 2-stroke outboard |
| 4 HP | Not stated | Tohatsu / Nissan 2-stroke outboard |
| 5 HP | Not stated | Tohatsu / Nissan 2-stroke outboard |
| 8 HP | Not stated | Tohatsu / Nissan 2-stroke outboard |
| 9.8 HP | Not stated | Tohatsu / Nissan 2-stroke outboard |
| Not stated | Not stated | Mercury / Mariner 2-stroke outboard, check the part number |
What's Included
| Component | Detail | Qty |
|---|---|---|
| Carburetor repair kit | Gaskets, needle and seat, float valve, soft plugs | 1 |
| Carburetor cleaner | Not included, clean the body before the rebuild | 0 |
| Fuel filter | Not included, fit a new one with the rebuild | 0 |
| Fuel lines | Not included, replace them if they are hard or cracked | 0 |
Key Features
| Feature | Detail |
|---|---|
| OEM replacement | Built to the Yamaha 6L5-W0093-00-00 spec |
| Cross referenced | Tohatsu 369-87122-1 and Sierra 18-7765 |
| Soft parts kit | Gaskets, needle and seat and float valve |
| Fixes lean and flood | The usual cause of a rough idle and a fouled plug |
| Multi brand fitment | Yamaha, Tohatsu and Nissan two strokes |
| Small and light | 55 g, 153 mm x 103 mm x 33 mm box |
Packing Dimensions
| Measure | Millimetres | Inches |
|---|---|---|
| Pack length | 153 mm | 6.02 in |
| Pack width | 103 mm | 4.06 in |
| Pack height | 33 mm | 1.30 in |
| Weight with packaging | 55 g | 1.94 oz |
Signs The Carburetor Needs A Kit
| What You See | What It Means | Action |
|---|---|---|
| Motor surges at a steady throttle | Lean mixture from a blocked passage | Fit the kit and clean the carburettor |
| Sneezing back through the intake | Lean idle circuit | Fit the kit and clean the carburettor |
| Fuel running out of the overflow | Needle and seat not sealing | Fit the kit |
| Plug keeps fouling | Running rich from a worn float valve | Fit the kit |
| Will not idle without the choke | Idle passages varnished | Fit the kit and clean the carburettor |
| Fuel left in over winter | Soft parts swelled or hardened | Fit the kit |
Fitting Notes
| Step | Action |
|---|---|
| 1 | Check the model or serial number against the tables above |
| 2 | Turn the fuel off and drain the carburettor bowl |
| 3 | Take the carburettor off and strip it on a clean tray |
| 4 | Note the order of the gaskets and the float setting |
| 5 | Soak the metal parts in carburettor cleaner and blow the passages through |
| 6 | Fit the new gaskets, needle, seat and float valve from the kit |
| 7 | Set the float height and refit the carburettor with new fuel lines if needed |
| 8 | Run the motor and set the idle mixture and speed |
Condition & Warranty
| Item | Detail |
|---|---|
| Condition | New / New with tags |
| Warranty | 3 year |
| Packaging | Box, 153 mm x 103 mm x 33 mm |
Before You Buy
- Replaces Yamaha 6L5-W0093-00-00 and 6N0-W0093-00-00
- Also listed as 6G1-W0093-00-00
- Crosses to Tohatsu 369-87122-1 and Sierra 18-7765
- Fits the Yamaha 3 HP 1988-2002, 6 HP 1988-1996 and 8 HP 1984-2009
- Fits the Tohatsu and Nissan 4, 5, 8 and 9.8 HP two strokes
- One carburetor repair kit, 55 g with packaging
- Box 153 mm x 103 mm x 33 mm
- 30-Day Easy Returns
Couldn't load pickup availability
Boat Owners' Review
Before You Buy
Frequently Asked Questions
What is your refund policy?
We offer a 14-day hassle-free return on all products. Items must be unused and in original packaging. Every XRmarine part is also covered by our 1-year warranty against manufacturing defects. If something is not right, email us at info@xrmarineparts.com — replacement or full refund, your choice.
See our full Refund Policy for complete details.
How does shipping work?
Free international shipping on every order — no minimums. We operate a global warehouse network with a main distribution centre in Asia (10-20 business days). We also hold stock in regional warehouses across the United States, Germany, the United Kingdom, Australia, and Poland (opening soon) — most orders arrive in 1-3 business days within those countries and in 2-8 business days to nearby regions. Tracking included.
See our full Shipping Policy.
How do you keep prices fair?
We cut out the middlemen. XRmarine sources directly from quality manufacturers and sells at honest prices. Same OEM-quality parts, no dealership markup. Every order comes with free shipping, real expert support, and a 1-year warranty.
Learn more on our About Us page.
What payment methods do you accept?
We currently accept PayPal — a fast, secure way to pay online. Credit card payments (Visa, Mastercard, American Express) and Shopify Payments are being set up and will be available soon. We appreciate your patience.