Water Pump Impeller Kit 06192-ZY6-000 for Honda BF115D BF135A BF150A 115 135 150 HP
Water Pump Impeller Kit 06192-ZY6-000 for Honda BF115D BF135A BF150A 115 135 150 HP
Product Overview
Water pump impeller kit 06192-ZY6-000 for Honda outboards, the service set for the BF115D, BF135A and BF150A four strokes. It replaces 06192-ZY6-000 and 06192-ZY6-010, crosses to Sierra 18-3284, and the impeller is 87.42 mm outside diameter with a 23.36 mm bore and six blades.
It fits the Honda 115 HP BF115D, the 135 HP BF135A and the 150 HP BF150A. These are the large four stroke Hondas used on ribs, pilothouse boats and offshore hulls, where the motor runs at a steady cruise for hours and the pump works continuously.
The kit is the impeller, the gasket, the keyway and the O ring, which is everything that comes off when the pump is opened. Replacing the impeller on schedule is the cheapest maintenance on the motor. Leaving it until the tell tale weakens risks the head, and that is an engine out of the water and a much larger bill.
Specifications
| Specification | Detail |
|---|---|
| Condition | New / New with tags |
| Type | Outboard water pump impeller kit |
| Fits | Honda BF115D, BF135A and BF150A four stroke outboards |
| Horsepower | 115 HP, 135 HP and 150 HP |
| Replaces | 06192-ZY6-000, 06192-ZY6-010 |
| Contents | Impeller, gasket, keyway, O ring |
| Shaft Type | Key drive |
| Material | Neoprene rubber |
| Net Weight | 146 g including packaging |
| Pack Size | 150 mm x 180 mm x 10 mm |
| Warranty | 3 year |
OEM Cross Reference
| Component | OEM Part Numbers |
|---|---|
| Water pump impeller kit | 06192-ZY6-000 |
| Water pump impeller kit, alternate | 06192-ZY6-010 |
| Water pump impeller | 19210-ZW1-B02, 19210-ZW1-B03, 19210-ZW1-B04 |
| Sierra cross reference | 18-3284 |
Impeller Dimensions
| Dimension | Metric | Imperial |
|---|---|---|
| Outside diameter | 87.42 mm | 3.44 inch |
| Inside diameter | 23.36 mm | 0.92 inch |
| Height | 31 mm | 1.22 inch |
| Blades | 6 | 6 |
| Shaft type | Key drive | Key drive |
| Material | Neoprene rubber | Neoprene rubber |
Compatible Engines
| Horsepower | Honda Model | Stroke | Cooling |
|---|---|---|---|
| 115 HP | BF115D | Four stroke | Water pump |
| 135 HP | BF135A | Four stroke | Water pump |
| 150 HP | BF150A | Four stroke | Water pump |
What's Included
| Component | Part Number | Qty |
|---|---|---|
| Water pump impeller | 19210-ZW1-B02 | 1 |
| Impeller housing gasket | 19234-ZY6-000 | 1 |
| Impeller drive key | 90752-ZW1-B02 | 1 |
| O ring | 91356-ZW1-B00 | 1 |
| Pump housing and wear plate | Not included, inspect while apart | 0 |
Weak Tell Tale Or Overheat
| What You See | What It Means | What To Do |
|---|---|---|
| Tell tale weaker than it was | Impeller vanes taking a set | Fit the service kit |
| No water at idle | Key or impeller failed | Kit with the new keyway |
| Overheat alarm under load | Loss of cooling flow | Kit, then check the plate |
| Rubber crumbs from the tell tale | Vanes breaking up | Kit and flush the passages |
| Water in the gear oil | Pump seals, separate fault | Pressure test the lower unit |
| New impeller, still hot | Housing or plate scored | Check the plate and housing |
Fitting Notes
| Step | Action |
|---|---|
| 1 | Check the Honda model, BF115D, BF135A or BF150A, before ordering |
| 2 | Drain the gear oil first, then drop the lower unit |
| 3 | Take the pump housing off and lift the old impeller out |
| 4 | Clean the plate and check the housing for scoring |
| 5 | Fit the new impeller with the keyway seated in the shaft |
| 6 | Fold the vanes in the direction of rotation as the housing goes on |
| 7 | Fit the new gasket and O ring and refit the lower unit |
| 8 | Run on muffs, check the tell tale, then check the gear oil level |
Condition & Warranty
| Item | Detail |
|---|---|
| Condition | New / New with tags |
| Warranty | 3 year |
| Packaging | Sealed retail packaging |
Before You Buy
- Fits Honda BF115D, BF135A and BF150A four stroke outboards
- 115 HP, 135 HP and 150 HP models
- Replaces 06192-ZY6-000 and 06192-ZY6-010
- Crosses to Sierra 18-3284
- Impeller is 87.42 mm outside diameter, 23.36 mm bore, 31 mm high, six blades
- Kit includes the impeller, gasket, keyway and O ring
- Pump housing and wear plate are not included
- 30-Day Easy Returns
- Ships from our warehouse with tracking
Couldn't load pickup availability
Boat Owners' Review
Before You Buy
Frequently Asked Questions
What is your refund policy?
We offer a 14-day hassle-free return on all products. Items must be unused and in original packaging. Every XRmarine part is also covered by our 1-year warranty against manufacturing defects. If something is not right, email us at info@xrmarineparts.com — replacement or full refund, your choice.
See our full Refund Policy for complete details.
How does shipping work?
Free international shipping on every order — no minimums. We operate a global warehouse network with a main distribution centre in Asia (10-20 business days). We also hold stock in regional warehouses across the United States, Germany, the United Kingdom, Australia, and Poland (opening soon) — most orders arrive in 1-3 business days within those countries and in 2-8 business days to nearby regions. Tracking included.
See our full Shipping Policy.
How do you keep prices fair?
We cut out the middlemen. XRmarine sources directly from quality manufacturers and sells at honest prices. Same OEM-quality parts, no dealership markup. Every order comes with free shipping, real expert support, and a 1-year warranty.
Learn more on our About Us page.
What payment methods do you accept?
We currently accept PayPal — a fast, secure way to pay online. Credit card payments (Visa, Mastercard, American Express) and Shopify Payments are being set up and will be available soon. We appreciate your patience.