Water Pump Impeller Rebuild Kit 6E0-W0078-A2 for Yamaha Mercury Mariner 4 5 6 HP Outboard — Australia Local Warehouse
Water Pump Impeller Rebuild Kit 6E0-W0078-A2 for Yamaha Mercury Mariner 4 5 6 HP Outboard — Australia Local Warehouse
Product Overview
Complete water pump kit for Yamaha and Mariner 4 HP to 6 HP outboards, weighing 183 g and supplied as the whole pump rather than the rubber alone. It replaces Yamaha 6E0-W0078-A2, 6E0-W0078-A2-00, 6E0-W0078-02-00, 6E0-W0078-01-00, 68D-W0078-00 and 68D-WG078-00, Mercury Mariner 47-96305M, 46-96305M, 46-810952M, 46-810953M and 46-810954M, and crosses to Sierra 18-3073. Dispatched from our Australia local warehouse.
The kit carries every part of the pump that wears: the impeller 6E0-44352-00 (44352), the stainless insert cup 6E0-44322-02 (44322), the wear plate 6E0-44323-00 (44323), the housing 6E0-44311-00, the gasket, the rubber damper, the dowel pin and the four bolts.
That matters on an Australian tinny that is run up a sand ramp. A pump that has swallowed grit loses its cup and plate long before the impeller looks tired, and fitting a new impeller into a scored housing simply transfers the damage to the new rubber. This kit replaces the whole wet end in one sitting.
Specifications
| Specification | Detail |
|---|---|
| Condition | New / New with tags |
| Type | Complete outboard water pump kit |
| Components | Impeller, housing, insert cup, wear plate, gasket, damper, pin, bolts |
| Fitment | Yamaha and Mariner 4 HP to 6 HP |
| Stroke | Two stroke and four stroke, see the engine table |
| Country of Origin | Taiwan |
| Shipping Weight | 183 g |
| Quantity | 1 kit |
OEM Cross Reference
| Brand | Part Numbers |
|---|---|
| Yamaha kit | 6E0-W0078-A2, 6E0-W0078-A2-00 |
| Yamaha kit | 6E0-W0078-02-00, 6E0-W0078-01-00, 6E0-W0078-02 |
| Yamaha kit | 68D-W0078-00, 68D-WG078-00 |
| Mercury kit | 47-96305M, 46-96305M |
| Mercury kit | 46-810952M, 46-810953M, 46-810954M |
| Sierra | 18-3073 |
Assembly Components
| Component | Yamaha Number | Mercury Number |
|---|---|---|
| Water pump impeller | 6E0-44352-00, 44352 | 47-96305M |
| Water pump housing | 6E0-44311-00 | 47-96299M |
| Stainless insert cup | 6E0-44322-02, 44322 | 47-96302M |
| Impeller wear plate | 6E0-44323-00, 44323 | 47-41822 |
| Gasket and small seals | 6E0-44315-A0 | 47-96300 |
| Rubber damper | 6E0-44366-00 | 47-14186M |
| Dowel pin | 93604-09066 | Not listed separately |
| Bolt and washer | 97095-06045 | Not listed separately |
Compatible Engines
| Horsepower | Brand and Type | Years | Notes |
|---|---|---|---|
| 4 HP | Yamaha 2 stroke | 1984 to 1999 | Direct fit |
| 5 HP | Yamaha 2 stroke | 1984 to 2002 | Direct fit |
| 4 HP | Yamaha 4 stroke | 2000 to 2005 | Direct fit |
| 6 HP | Yamaha 4 stroke F6 | As listed | Direct fit |
| 4 HP | Mariner 4AC | As listed | Serial code 6E0 |
| 4 HP | Mariner 4AS | As listed | Serial code 6E1 |
| 5 HP | Mariner 5C | As listed | Serial code 6E3 |
| 5 HP | Mariner 5CS | As listed | Serial code 6E4 |
| 4 HP | Mercury 4A | As listed | 6E0 models |
| 5 HP | Mercury 5C | As listed | 6E3 models |
Serial Code Guide
| Code | Model Group | Covered Here |
|---|---|---|
| 6E0 | Mariner 4AC, Mercury 4A | Yes |
| 6E1 | Mariner 4AS | Yes |
| 6E3 | Mariner 5C, Mercury 5C | Yes |
| 6E4 | Mariner 5CS | Yes |
| 6E9 | Earlier 4 and 5 HP | No, different pump |
What's Included
| Component | Qty |
|---|---|
| Water pump impeller | 1 |
| Water pump housing | 1 |
| Stainless insert cup | 1 |
| Impeller wear plate | 1 |
| Pump gasket | 1 |
| Rubber water seal damper | 1 |
| Dowel pin | 1 |
| Bolt and washer | 4 |
Full Kit or Impeller Only
| Your Pump | Right Choice | Why |
|---|---|---|
| Housing and cup clean, only the rubber is tired | Impeller only | The rest of the pump still seals |
| Cup scored, plate grooved or housing worn | This complete kit | A new impeller will not seal in a worn cup |
| Ran dry or overheated | This complete kit | Heat usually takes the cup and gasket with it |
| Unknown history, motor bought used | This complete kit | You inspect and rebuild the wet end once |
Fitting Notes
| Step | Action |
|---|---|
| 1 | Drain the gearcase and split the lower unit |
| 2 | Note the blade direction and photograph the pump before stripping |
| 3 | Check the driveshaft key slot and the seal surface for grooves |
| 4 | Clean both mating faces, old gasket left on shifts the housing |
| 5 | Fit the gasket, wear plate and insert cup into the housing |
| 6 | Grease the cup and fold the impeller blades in the running direction |
| 7 | Seat the dowel pin and torque the four bolts evenly |
| 8 | Check the telltale at idle on muffs before the boat goes back in |
Condition & Warranty
| Item | Detail |
|---|---|
| Condition | New / New with tags |
| Warranty | Standard |
| Packaging | Sealed retail packaging |
Shipping from Australia
| Destination | Warehouse | Note |
|---|---|---|
| Australia | Australia local warehouse | Domestic delivery, no import duty |
| New Zealand | Australia local warehouse | Short transit, customs may apply |
| Asia Pacific | Australia local warehouse | Tracked air and sea options |
Before You Buy
- Check the serial code on the Mariner bracket, 6E0, 6E1, 6E3 and 6E4 are covered, the earlier 6E9 is not
- Compare the housing that comes off the motor, round and square top housings are different
- Check the driveshaft key slot and seal surface before fitting a new pump
- Clean the mating faces first, old gasket left on loses pump pressure
- This is the complete pump kit, not the impeller alone
- 30-Day Easy Returns
- Ships from our Australia local warehouse
Couldn't load pickup availability
Out of stock
View full details
Boat Owners' Review
Before You Buy
Frequently Asked Questions
What is your refund policy?
We offer a 14-day hassle-free return on all products. Items must be unused and in original packaging. Every XRmarine part is also covered by our 1-year warranty against manufacturing defects. If something is not right, email us at info@xrmarineparts.com — replacement or full refund, your choice.
See our full Refund Policy for complete details.
How does shipping work?
Free international shipping on every order — no minimums. We operate a global warehouse network with a main distribution centre in Asia (10-20 business days). We also hold stock in regional warehouses across the United States, Germany, the United Kingdom, Australia, and Poland (opening soon) — most orders arrive in 1-3 business days within those countries and in 2-8 business days to nearby regions. Tracking included.
See our full Shipping Policy.
How do you keep prices fair?
We cut out the middlemen. XRmarine sources directly from quality manufacturers and sells at honest prices. Same OEM-quality parts, no dealership markup. Every order comes with free shipping, real expert support, and a 1-year warranty.
Learn more on our About Us page.
What payment methods do you accept?
We currently accept PayPal — a fast, secure way to pay online. Credit card payments (Visa, Mastercard, American Express) and Shopify Payments are being set up and will be available soon. We appreciate your patience.