1395-9179 Carburetor Kit for Mercury Mariner Outboard 6 8 9.9 10 15 20 25 HP — Australia Local Warehouse
1395-9179 Carburetor Kit for Mercury Mariner Outboard 6 8 9.9 10 15 20 25 HP — Australia Local Warehouse
Product Overview
Carburetor repair kit for Mercury and Mariner outboards from 6 HP to 25 HP, covering the 8, 9.9, 10, 15 and 20 HP models as well. It replaces Mercury 1395-9761, 1395-97611, 1395-9803, 1395-9725, 1395-9645, 1395-9377, 1395-9179 and 1395-811357, and crosses to Sierra 18-7212, GLM 40610 and Mallory 9-37304 and 37304. Dispatched from our Australia local warehouse.
The kit carries the gaskets, needle and seat, and the soft parts that harden when an outboard sits through a long spell between trips. A carburettor that has started to flood, surge or refuse to idle can be brought back without buying a whole carburettor.
These are the WMC carburettors fitted across the small Mercury and Mariner range. They run a small float bowl and a single mixture screw, and the rubber tip on the needle takes a set after a few seasons, which is why the engine drips fuel and floods after a long idle. Rebuilding is the cheap fix as long as the throttle shaft and the bore are not worn, so check both before ordering.
Specifications
| Specification | Detail |
|---|---|
| Condition | New / New with tags |
| Type | Carburetor rebuild kit |
| Engine Family | Mercury and Mariner outboards |
| Horsepower | 6, 8, 9.9, 10, 15, 20 and 25 HP |
| Carburettor | WMC, single mixture screw |
| Quantity | 1 carburetor rebuild kit |
| Packaging Size | 150 x 180 x 10 mm (5.9 x 7.1 x 0.4 in) |
OEM Cross Reference
| Brand | Part Numbers |
|---|---|
| Mercury | 1395-9761, 1395-97611 |
| Mercury | 1395-9803, 1395-9725 |
| Mercury | 1395-9645, 1395-9377 |
| Mercury | 1395-9179, 1395-811357 |
| Sierra | 18-7212 |
| GLM | 40610 |
| Mallory | 9-37304, 37304 |
Compatible Engines
| Outboard | Serial Number | Kit Fits |
|---|---|---|
| 6 HP | 0A197112 and up | Yes |
| 8 HP | 0A197112 and up | Yes |
| 9.9 HP | 0A197112 and up | Yes |
| 10 HP | 0D038000 and up | Yes |
| 15 HP | 0B292414 and up | Yes |
| 20 HP | 6443973 and up | Yes |
| 25 HP | 6443973 and up | Yes |
What's Included
| Component | Qty |
|---|---|
| Carburetor rebuild kit, complete | 1 |
Flooding, Surge and Idle Faults
| Symptom | Likely Cause | Fixed by This Kit |
|---|---|---|
| Floods after sitting at idle | Needle tip hardened, float level high | Yes |
| Drips fuel when tilted | Needle and seat not sealing | Yes |
| Surges at mid throttle | Blocked passage or air leak at a gasket | Yes |
| Will not idle below 900 rpm | Idle circuit blocked or mixture screw seal hard | Yes |
| Runs rich, black plugs | Float level or worn needle | Yes |
| Idle changes when the engine is bumped | Worn throttle shaft | No, shaft or body needed |
Fitting Notes
| Step | Action |
|---|---|
| 1 | Read the serial number on the clamp bracket before ordering |
| 2 | Note the mixture screw setting before stripping, it is your starting point |
| 3 | Drain the float bowl and remove the carburettor |
| 4 | Soak the body in cleaner and blow every passage with air, never poke with wire |
| 5 | Fit the new needle, seat and gaskets from the kit |
| 6 | Set the float height to spec and check it holds pressure |
| 7 | Refit and set the mixture screw back to the recorded setting |
| 8 | Run on muffs and check for leaks before the first trip |
Condition & Warranty
| Item | Detail |
|---|---|
| Condition | New / New with tags |
| Warranty | Standard |
| Packaging | Sealed retail packaging |
Shipping from Australia
| Destination | Warehouse | Note |
|---|---|---|
| Australia | Australia local warehouse | Domestic delivery, no import duty |
| New Zealand | Australia local warehouse | Short transit, customs may apply |
| Asia Pacific | Australia local warehouse | Tracked air and sea options |
Before You Buy
- Read the serial number on the clamp bracket, the 6, 8 and 9.9 HP start at 0A197112 and the 20 and 25 HP at 6443973
- Check the carburettor body for a worn throttle shaft, a rebuild will not fix a leaking shaft
- Soak the body in cleaner and blow every passage with air, never poke them with wire
- Set the float height to spec and check it holds pressure before fitting
- This is the rebuild kit, the carburettor body is not included
- 30-Day Easy Returns
- Ships from our Australia local warehouse
Verfügbarkeit für Abholungen konnte nicht geladen werden
Nicht vorrätig
Vollständige Details anzeigen
Boat Owners' Review
Before You Buy
Frequently Asked Questions
What is your refund policy?
We offer a 14-day hassle-free return on all products. Items must be unused and in original packaging. Every XRmarine part is also covered by our 1-year warranty against manufacturing defects. If something is not right, email us at info@xrmarineparts.com — replacement or full refund, your choice.
See our full Refund Policy for complete details.
How does shipping work?
Free international shipping on every order — no minimums. We operate a global warehouse network with a main distribution centre in Asia (10-20 business days). We also hold stock in regional warehouses across the United States, Germany, the United Kingdom, Australia, and Poland (opening soon) — most orders arrive in 1-3 business days within those countries and in 2-8 business days to nearby regions. Tracking included.
See our full Shipping Policy.
How do you keep prices fair?
We cut out the middlemen. XRmarine sources directly from quality manufacturers and sells at honest prices. Same OEM-quality parts, no dealership markup. Every order comes with free shipping, real expert support, and a 1-year warranty.
Learn more on our About Us page.
What payment methods do you accept?
We currently accept PayPal — a fast, secure way to pay online. Credit card payments (Visa, Mastercard, American Express) and Shopify Payments are being set up and will be available soon. We appreciate your patience.