Carburetor Rebuild Kit 6E5-W0093-06-00 18-7002 for Yamaha V4 V6 115 130 150 175 200 225 HP
Carburetor Rebuild Kit 6E5-W0093-06-00 18-7002 for Yamaha V4 V6 115 130 150 175 200 225 HP
Product Overview
Carburetor rebuild kit for Yamaha V4 and V6 two stroke outboards from 115 HP to 225 HP built between 1986 and 1995. It replaces Yamaha 6E5-W0093-06-00, 6G5-W0093-05-XX, 6K7-W0093-03-00 and 6N6-W0093-01-00 and crosses to Sierra 18-7002, and the kit carries the needle, the seat and the gaskets for one carburettor.
These engines run two or three carburettors, and the kit is priced and packed per carburettor, so a V6 needs three. The parts that wear are the needle and seat, which control the fuel level in the bowl, and the gaskets, which harden and leak air into the idle circuit.
The fitment covers the 115 HP from 1986 to 1988, 1992 to 1993 and 1995, the 130 HP from 1988, 1992 to 1993 and 1995, the 150 and 175 HP from 1986 to 1987 and 1992 to 1995, the 200 HP from 1986 to 1987 and 1992 to 1995, and the 225 HP from 1992 to 1993.
Specifications
| Specification | Detail |
|---|---|
| Condition | New / New with tags |
| Type | Outboard carburetor rebuild kit |
| Application | One carburettor per kit |
| Fits | Yamaha V4 and V6 two stroke, 115 HP to 225 HP |
| Years | 1986 to 1995 |
| Net Weight | 51 g including packaging |
| Pack Size | 15 x 18 x 1 cm |
OEM Cross Reference
| Brand | OEM Part Numbers |
|---|---|
| Yamaha | 6E5-W0093-06-00 |
| Yamaha, alternate | 6G5-W0093-05-XX |
| Yamaha, alternate | 6K7-W0093-03-00 |
| Yamaha, alternate | 6N6-W0093-01-00 |
| Sierra | 18-7002 |
Compatible Engines
| Horsepower | Years | Carburettors |
|---|---|---|
| 115 HP | 1986 to 1988, 1992 to 1993, 1995 | 2 or 4 depending on model |
| 130 HP | 1988, 1992 to 1993, 1995 | 2 or 4 depending on model |
| 150 HP | 1986 to 1987, 1992 to 1995 | 3 |
| 175 HP | 1986 to 1987, 1992 to 1995 | 3 |
| 200 HP | 1986 to 1987, 1992 to 1995 | 3 |
| 225 HP | 1992 to 1993 | 3 |
What's Included
| Component | Detail | Qty |
|---|---|---|
| Needle valve | Included, number not listed | 1 |
| Needle seat | Included, number not listed | 1 |
| Gasket set for one carburettor | Included, numbers not listed | 1 |
| Float and jets | Not included, reuse if serviceable | 0 |
Symptoms a Rebuild Kit Fixes
| What You See | Most Likely Cause | What To Do |
|---|---|---|
| Fuel running out of the carburettor | Needle and seat not sealing | Rebuild the carburettor with this kit |
| Bowls flooding at idle | Needle worn, float level high | Kit per carburettor, check the float |
| Lean at idle, will not settle | Gaskets leaking air | Renew the gaskets in the kit |
| Rough running on one bank | One carburettor flooding or lean | Kit that carburettor, check the others |
| Fuel smell under the cowl | Bowl gasket hardened | Rebuild, replace all the gaskets |
| Motor loads up at trolling speed | Needle leaking, level rising | Rebuild before chasing ignition |
Old Two Stroke V4 and V6 Motors
| How the Motor Is Used | Effect on the Carburettor | What To Do |
|---|---|---|
| Stored with fuel in the bowls | Fuel varnish blocks jets and sticks the needle | Drain the bowls before storage |
| Ethanol blend fuel | Gaskets swell and harden | Use fresh fuel, rebuild at the first leak |
| Long periods laid up | Needle sticks, floods on start up | Rebuild in spring |
| Salt water use | Corrosion on the linkage and screws | Fresh water flush, grease the linkage |
| Fishing boat at trolling speed | Idle circuit wears first | Rebuild all the carburettors at once |
| Twin or triple carburettor motors | Uneven mixtures between cylinders | Do them together, set the sync after |
Fitting Notes
| Step | Action |
|---|---|
| 1 | Check the number on the old gasket set, 6E5-W0093-06-00 crosses to Sierra 18-7002 |
| 2 | Count the carburettors on the motor, this kit covers one carburettor |
| 3 | Clamp the fuel line and work on a bench with the carburettor off the motor |
| 4 | Note the jet sizes and the mixture screw turns before stripping |
| 5 | Clean the body and passages, then fit the new needle and seat |
| 6 | Set the float level to the service manual figure, not by eye |
| 7 | Fit the new gaskets dry, no sealant in a carburettor |
| 8 | Refit, prime and run, then set the idle mixture and synchronise the carburettors |
Condition & Warranty
| Item | Detail |
|---|---|
| Condition | New / New with tags |
| Warranty | Standard |
| Packaging | Sealed retail packaging |
Before You Buy
- Check the number on the old gasket set, 6E5-W0093-06-00 and Sierra 18-7002 interchange
- Fits Yamaha 115, 130, 150, 175, 200 and 225 HP V4 and V6 two strokes
- Years 1986 to 1995, check your model year against the table
- This kit covers one carburettor, a V6 needs three
- Contents are the needle, the seat and the gaskets, the float is not included
- Set the float level properly, a rebuild with the wrong level floods again
- 30-Day Easy Returns
- Ships from our warehouse with tracking
Verfügbarkeit für Abholungen konnte nicht geladen werden
Boat Owners' Review
Before You Buy
Frequently Asked Questions
What is your refund policy?
We offer a 14-day hassle-free return on all products. Items must be unused and in original packaging. Every XRmarine part is also covered by our 1-year warranty against manufacturing defects. If something is not right, email us at info@xrmarineparts.com — replacement or full refund, your choice.
See our full Refund Policy for complete details.
How does shipping work?
Free international shipping on every order — no minimums. We operate a global warehouse network with a main distribution centre in Asia (10-20 business days). We also hold stock in regional warehouses across the United States, Germany, the United Kingdom, Australia, and Poland (opening soon) — most orders arrive in 1-3 business days within those countries and in 2-8 business days to nearby regions. Tracking included.
See our full Shipping Policy.
How do you keep prices fair?
We cut out the middlemen. XRmarine sources directly from quality manufacturers and sells at honest prices. Same OEM-quality parts, no dealership markup. Every order comes with free shipping, real expert support, and a 1-year warranty.
Learn more on our About Us page.
What payment methods do you accept?
We currently accept PayPal — a fast, secure way to pay online. Credit card payments (Visa, Mastercard, American Express) and Shopify Payments are being set up and will be available soon. We appreciate your patience.