Carburetor Repair Kit 63V-W0093 63V-W0093-00-00 for Yamaha 2 Stroke 9.9HP 15HP Outboard Sierra 18-7058 — Germany Local Warehouse
Carburetor Repair Kit 63V-W0093 63V-W0093-00-00 for Yamaha 2 Stroke 9.9HP 15HP Outboard Sierra 18-7058 — Germany Local Warehouse
Product Overview
Carburetor repair kit for Yamaha 9.9 HP and 15 HP two-stroke outboards built from 1996 to 2006 and later, supplied as 1 overhaul kit weighing 71 g in a 12 x 10 x 3 cm (4.7 x 3.9 x 1.2 in) pack. It replaces Yamaha 63V-W0093-00-00 and crosses to Sierra 18-7058. The kit renews the soft parts of one carburettor: gaskets, O-rings, needle valve and seat. Shipped from our Germany local warehouse.
The 9.9 and 15 HP two-stroke was one of the most common motors on German and Dutch inland water, and most of them are still on the water. Their carburettors are simple, which makes them easy to rebuild and equally easy to leave half done.
Since E10 arrived at German forecourts, the bowl gasket and the needle seat are the two parts that fail first. Ethanol softens older gasket material and holds water against the aluminium, so a motor that sat with E10 in the bowl over winter often needs a kit in spring even though it ran perfectly in October.
Specifications
| Specification | Detail |
|---|---|
| Condition | New / New with tags |
| Type | Carburetor overhaul kit |
| Engine | Yamaha two-stroke outboards |
| Horsepower | 9.9 HP and 15 HP |
| Years | 1996 to 2006 and newer |
| Contents | Gaskets, O-rings, needle valve and seat |
| Shipping Weight | 71 g |
| Packaging Size | 12 x 10 x 3 cm (4.7 x 3.9 x 1.2 in) |
| Quantity | 1 kit |
OEM Cross Reference
| Brand | OEM Part Numbers |
|---|---|
| Yamaha | 63V-W0093-00-00, 63V-W0093 |
| Sierra | 18-7058 |
Compatible Engines
| HP | Models | Years |
|---|---|---|
| 9.9 | 9.9ELHU, 9.9ELHV, 9.9ELRU, 9.9ELRV | 1996-1997 |
| 9.9 | 9.9ESHU, 9.9ESHV, 9.9MSHU, 9.9MSHV | 1996-1997 |
| 9.9 | 9.9MLHU, 9.9MLHV, 9.9MLHW, 9.9MLHX, 9.9MLHY | 1996-2000 |
| 9.9 | 9.9MSHW, 9.9MSHX, 9.9MSHY, 9.9MSHZ, 9.9MSHKZ | 1998-2001 |
| 9.9 | 9.9MSHA, 9.9MSHB, 9.9MSHC, 9.9MSHD, 9.9MSH | 2002-2006 and newer |
| 15 | 15ELHU, 15ELHV, 15ELRU, 15ESHU, 15ESHV, 15MLHU | 1996-1997 |
| 15 | 15MLHV, 15MLHW, 15MLHX, 15MLHY | 1997-2000 |
| 15 | 15MSHKZ, 15MSHA, 15MSHB, 15MSHC, 15MSHD, 15MSH | 2001-2006 and newer |
What's Included
| Component | Qty |
|---|---|
| Carburetor repair kit, 1 carburettor | 1 |
| Gaskets and O-rings | As required |
| Needle valve and seat | 1 set |
Ethanol and the Bowl Gasket
| What Changed | What It Does to the Carburettor | What to Do |
|---|---|---|
| E10 fuel left in the bowl over winter | Bowl gasket swells and weeps | Fit the kit, drain the bowl before lay up |
| Water absorbed by ethanol | Needle and seat corrode, fuel level drifts | New needle and seat from the kit |
| Old fuel mix with two-stroke oil | Oil separates and gums the passages | Fresh mix, then set the mixture screw |
| Motor run dry at the end of the season | Gaskets stay dry rather than soaked | The kit lasts years instead of one |
| Bowl screws overtightened | Gasket distorted, leak returns | Even pressure, hand tight plus a nip |
| Carburettor stripped twice before | Worn throttle shaft, not fixable with seals | Check shaft play before buying a kit |
Fitting Notes
| Step | Action |
|---|---|
| 1 | Match the model code on the engine plate against the table, 9.9 and 15 HP share the carburettor family |
| 2 | Count and write down the mixture screw turns out before it comes apart, it saves a lot of adjusting later |
| 3 | Drain the bowl and keep the parts in a tray, the needle and seat are small and easy to lose |
| 4 | Soak the body and blow out every passage with air, a kit will not fix a blocked jet |
| 5 | Set the float height to the book figure, an incorrect level causes both flooding and starvation |
| 6 | Fit all the O-rings from the kit, an old one left in place is the usual cause of a persistent weep |
| 7 | Start on muffs, set the idle, then recheck on the water in gear |
| 8 | Before winter, close the fuel tap and run the motor until the bowl is empty |
Condition & Warranty
| Item | Detail |
|---|---|
| Condition | New / New with tags |
| Warranty | Standard |
| Packaging | Sealed retail packaging |
Shipping from Germany
| Destination | Warehouse | Note |
|---|---|---|
| Germany | Germany local warehouse | Domestic delivery, no import duty |
| Austria, Netherlands, Belgium | Germany local warehouse | EU delivery, no customs charge |
| Other EU destinations | Germany local warehouse | EU delivery, VAT included |
Before You Buy
- Match the model code on the engine plate against the table, 9.9 and 15 HP share the carburettor family
- Count the mixture screw turns out before stripping the carburettor
- Check the throttle shaft for play, a kit will not fix a worn shaft
- Set the float height and blow out every passage before reassembly
- This is the soft parts kit, the carburettor body, jets and float are not included
- 30-Day Easy Returns
- Ships from our Germany local warehouse
Verfügbarkeit für Abholungen konnte nicht geladen werden
Nicht vorrätig
Vollständige Details anzeigen
Boat Owners' Review
Before You Buy
Frequently Asked Questions
What is your refund policy?
We offer a 14-day hassle-free return on all products. Items must be unused and in original packaging. Every XRmarine part is also covered by our 1-year warranty against manufacturing defects. If something is not right, email us at info@xrmarineparts.com — replacement or full refund, your choice.
See our full Refund Policy for complete details.
How does shipping work?
Free international shipping on every order — no minimums. We operate a global warehouse network with a main distribution centre in Asia (10-20 business days). We also hold stock in regional warehouses across the United States, Germany, the United Kingdom, Australia, and Poland (opening soon) — most orders arrive in 1-3 business days within those countries and in 2-8 business days to nearby regions. Tracking included.
See our full Shipping Policy.
How do you keep prices fair?
We cut out the middlemen. XRmarine sources directly from quality manufacturers and sells at honest prices. Same OEM-quality parts, no dealership markup. Every order comes with free shipping, real expert support, and a 1-year warranty.
Learn more on our About Us page.
What payment methods do you accept?
We currently accept PayPal — a fast, secure way to pay online. Credit card payments (Visa, Mastercard, American Express) and Shopify Payments are being set up and will be available soon. We appreciate your patience.