IAC Valve 18137-93J01 Suzuki Outboard DF150 DF175 DF200 DF200A Idle Control
IAC Valve 18137-93J01 Suzuki Outboard DF150 DF175 DF200 DF200A Idle Control
Product Overview
Idle air control valve for Suzuki four stroke outboards, the 150 HP DF150, the 175 HP DF175 and the 200 HP DF200 and DF200A. This replacement part replaces Suzuki 18137-93J01, 18137-93J00, 18137-93J00-000 and 1813793J01000, and ships as one valve in a 150 mm x 100 mm x 50 mm box at 159 g.
The valve bolts to the intake manifold beside the throttle body. It bleeds a controlled amount of air past the throttle plate so the ECU can hold idle, and it opens a little further when the motor is cold or when the load comes on at idle in gear.
When the valve sticks the symptom is usually the opposite of what owners expect: the motor idles too high, or it stalls when it is put into gear, or the idle hunts up and down a few hundred RPM at the dock.
Fitment is listed by model and VIN range: DF150 from 15002Z-710001, 15002F-710001, 15002F-810001 and 15002Z-310001, DF175 from 17502Z-710001, 17502F-310001 and 17502F-810001, and DF200 and DF200A from the 20003F and 20003Z series. The DF225 and DF250 share the intake manifold assembly in the Suzuki catalogue, but confirm the VIN range before ordering those.
Specifications
| Specification | Detail |
|---|---|
| Condition | New / New with tags |
| Type | Idle air control valve |
| Suzuki Part Numbers | 18137-93J01, 18137-93J00, 18137-93J00-000, 1813793J01000 |
| Fits | Suzuki four stroke outboards DF150, DF175, DF200 and DF200A |
| Fits Horsepower | 150HP, 175HP, 200HP and 225HP to 250HP by VIN range |
| Location | Intake manifold, throttle body |
| Package Contents | 1 x IAC valve |
| Net Weight | 159 g including packaging |
| Pack Size | 150 mm x 100 mm x 50 mm |
| Pack Size In Inches | 5.91 in x 3.94 in x 1.97 in |
| Warranty | 3 year |
OEM Cross Reference
| Brand | Part Numbers |
|---|---|
| Suzuki | 18137-93J01 |
| Suzuki | 18137-93J00, 18137-93J00-000 |
| Suzuki | 1813793J01000 (pack format) |
Compatible Engines
| Model | VIN From |
|---|---|
| DF200ATX, 2018 | 20003F-810001 |
| DF150, DF150ZX | 15002Z-710001 |
| DF200A, DF200ASTX | 20003F-910001 |
| DF200A, DF200AZX | 20003Z-910001 |
| DF200A, DF200AZX | 20003Z-810001 |
| DF200A, DF200ATL | 20003F-910001 |
| DF150, DF150TL | 15002F-710001 |
| DF200A, DF200ATXW | 20003F-610001 |
| DF200A, DF200ATL | 20003F-510001 |
| DF150, DF150STX | 15002F-810001 |
| DF150, DF150ZX | 15002Z-310001 |
| DF175, DF175TXZW2 | 17502Z-710001 |
| DF175, DF175TL | 17502F-310001 |
| DF200A, DF200ASTL | 20003F-810001 |
| DF200A, DF200ATX2 | 20003F-710001 |
| DF175, DF175TL | 17502F-810001 |
| DF150STL, 2018 | 15002F-810001 |
DF225 and DF250 are listed for the same intake manifold assembly in the Suzuki parts catalogue. Check the VIN before ordering those two.
What's Included
| Component | Detail | Qty |
|---|---|---|
| IAC valve | 18137-93J01 | 1 |
| Gasket | Not included, reuse the original if it is sound | 0 |
| Mounting bolts | Not included, reuse the originals | 0 |
Signs The Valve Is Sticking
| What You See | What It Means | What To Do |
|---|---|---|
| Idle hangs high after coming off the throttle | Valve stuck open | Fit the new valve |
| Stalls when put into gear | Valve not adding air under load | Fit the new valve |
| Idle hunts up and down at the dock | Pintle sticking in its bore | Fit the new valve |
| Hard to start cold, fine when warm | Cold idle air path blocked | Fit the new valve |
| Rough idle with a strong fuel smell | Air and fuel mix wrong at idle | Fit the new valve |
| Check engine light on at idle | Idle air control circuit out of range | Fit the new valve |
Fitting Notes
| Step | Action |
|---|---|
| 1 | Check the model and VIN against the table above |
| 2 | Key off and disconnect the battery before unplugging the valve |
| 3 | Unplug the connector and undo the mounting bolts |
| 4 | Lift the old valve out and check the bore for carbon |
| 5 | Clean the manifold face without pushing carbon into the intake |
| 6 | Fit the new valve with a sound gasket and snug the bolts |
| 7 | Plug the connector in fully and reconnect the battery |
| 8 | Start the motor and let it idle, then check the idle settles after a run |
Condition & Warranty
| Item | Detail |
|---|---|
| Condition | New / New with tags |
| Warranty | 3 year |
| Packaging | Boxed, 150 mm x 100 mm x 50 mm |
Before You Buy
- Fits Suzuki DF150 from VIN 15002Z-710001, 15002F-710001 and 15002F-810001
- Fits Suzuki DF150 from VIN 15002Z-310001
- Fits Suzuki DF175 from VIN 17502Z-710001, 17502F-310001 and 17502F-810001
- Fits Suzuki DF200 and DF200A from the 20003F and 20003Z VIN series
- DF225 and DF250 listed in the catalogue, confirm the VIN first
- Replaces Suzuki 18137-93J01 and 18137-93J00
- Bolts to the intake manifold beside the throttle body
- 159 g with packaging, box 150 mm x 100 mm x 50 mm
- 30-Day Easy Returns
Verfügbarkeit für Abholungen konnte nicht geladen werden
Boat Owners' Review
Before You Buy
Frequently Asked Questions
What is your refund policy?
We offer a 14-day hassle-free return on all products. Items must be unused and in original packaging. Every XRmarine part is also covered by our 1-year warranty against manufacturing defects. If something is not right, email us at info@xrmarineparts.com — replacement or full refund, your choice.
See our full Refund Policy for complete details.
How does shipping work?
Free international shipping on every order — no minimums. We operate a global warehouse network with a main distribution centre in Asia (10-20 business days). We also hold stock in regional warehouses across the United States, Germany, the United Kingdom, Australia, and Poland (opening soon) — most orders arrive in 1-3 business days within those countries and in 2-8 business days to nearby regions. Tracking included.
See our full Shipping Policy.
How do you keep prices fair?
We cut out the middlemen. XRmarine sources directly from quality manufacturers and sells at honest prices. Same OEM-quality parts, no dealership markup. Every order comes with free shipping, real expert support, and a 1-year warranty.
Learn more on our About Us page.
What payment methods do you accept?
We currently accept PayPal — a fast, secure way to pay online. Credit card payments (Visa, Mastercard, American Express) and Shopify Payments are being set up and will be available soon. We appreciate your patience.