Inline Fuel Filter 433190 for Johnson Evinrude Outboard 90 100 115 150 175 HP
Inline Fuel Filter 433190 for Johnson Evinrude Outboard 90 100 115 150 175 HP
Product Overview
Inline fuel filter 433190 for Johnson and Evinrude V4 and V6 60 degree loop charged outboards from 90 HP to 175 HP, crossing to Sierra 18-79781. It measures 150 mm x 100 mm x 40 mm (5.91 in x 3.94 in x 1.57 in) and weighs 42 g including packaging. One filter is supplied.
This is the filter that sits in the fuel line between the primer bulb and the engine, not on the engine itself. On the V4 60 degree motors it covers 90 HP from 1995 to 2006 and 115 HP over the same years. On the V6 it covers 150 HP and 175 HP from 1991 to 2006.
Both Johnson and Evinrude used the same fuel circuit across these blocks, so 433190 is the one number for the whole group. If the inside of the cowling says Johnson or Evinrude and the block is a 60 degree V4 or V6, this is the filter.
The filter is a service item, not a repair. Change it on hours or on schedule and the carburetors downstream stay clean.
Specifications
| Specification | Detail |
|---|---|
| Condition | New / New with tags |
| Type | Inline fuel filter |
| Johnson / Evinrude Part Number | 433190 |
| Sierra Cross Reference | 18-79781 |
| Fits | Johnson and Evinrude V4 and V6 60 degree outboards |
| Years Covered | 1991 to 2006 |
| Package Contents | 1 x fuel filter |
| Country of Origin | Taiwan |
| Net Weight | 42 g including packaging |
| Pack Size | 150 mm x 100 mm x 40 mm |
| Pack Size In Inches | 5.91 in x 3.94 in x 1.57 in |
| Warranty | 3 year |
OEM Cross Reference
| Brand | Part Numbers |
|---|---|
| Johnson Outboard | 433190 |
| Evinrude Outboard | 433190 |
| Sierra | 18-79781 |
Compatible Engines
| Horsepower | Engine Type | Years |
|---|---|---|
| 90 HP | V4 60 degree | 1995 to 2006 |
| 100 HP | V4 60 degree | 1998 to 2001 |
| 115 HP | V4 60 degree | 1995 to 2006 |
| 150 HP | V6 60 degree | 1991 to 2006 |
| 175 HP | V6 60 degree | 1991 to 2006 |
What's Included
| Component | Detail | Qty |
|---|---|---|
| Inline fuel filter 433190 | As pictured | 1 |
| Fuel line and clips | Not included | 0 |
Signs The Filter Needs Replacing
| What You See | What It Means | What To Do |
|---|---|---|
| Motor leans out at full throttle | Filter restricted | Fit the new filter |
| Primer bulb will not stay hard | Blocked filter or air leak | Fit the new filter and check the line |
| Filter body dark or cloudy | Water or debris in the fuel | Fit the new filter and drain the tank |
| Surging at cruise | Intermittent fuel starvation | Fit the new filter |
| Hard starting after storage | Old fuel and a loaded element | Fit the new filter and fresh fuel |
| Fuel smell around the filter | Weeping at the joints | Fit the new filter and check the clips |
When To Change It
| Use | Interval | Why |
|---|---|---|
| Recreational use | Every 100 hours or once a season | Cheapest part on the fuel line |
| Commercial use | Every 50 to 100 hours | Hours add up fast |
| Winter lay up | Before storage, not after | Old fuel sits in the element all winter |
| Unknown service history | Straight away | You cannot tell by looking |
| After any fuel contamination | Same day | The element has already done its job |
Fitting Notes
| Step | Action |
|---|---|
| 1 | Check the horsepower, block type and year against the table above |
| 2 | Close the fuel tap and note which way the arrow points |
| 3 | Take the old filter out, catching the fuel in a rag |
| 4 | Fit the new 433190 filter with the flow arrow the same way |
| 5 | Tighten the clips and check the line is not kinked |
| 6 | Prime the bulb and check for leaks |
| 7 | Run the motor and check it pulls clean at full throttle |
Condition & Warranty
| Item | Detail |
|---|---|
| Condition | New / New with tags |
| Warranty | 3 year |
| Packaging | Sealed retail packaging |
Before You Buy
- Fits Johnson and Evinrude V4 60 degree 90, 100 and 115 HP outboards
- Fits Johnson and Evinrude V6 60 degree 150 and 175 HP outboards
- Covers model years 1991 to 2006
- Replaces 433190 and crosses to Sierra 18-79781
- One filter included, 42 g with packaging
- Pack size 150 mm x 100 mm x 40 mm
- 30-Day Easy Returns
- Ships from our warehouse with tracking
Verfügbarkeit für Abholungen konnte nicht geladen werden
Boat Owners' Review
Before You Buy
Frequently Asked Questions
What is your refund policy?
We offer a 14-day hassle-free return on all products. Items must be unused and in original packaging. Every XRmarine part is also covered by our 1-year warranty against manufacturing defects. If something is not right, email us at info@xrmarineparts.com — replacement or full refund, your choice.
See our full Refund Policy for complete details.
How does shipping work?
Free international shipping on every order — no minimums. We operate a global warehouse network with a main distribution centre in Asia (10-20 business days). We also hold stock in regional warehouses across the United States, Germany, the United Kingdom, Australia, and Poland (opening soon) — most orders arrive in 1-3 business days within those countries and in 2-8 business days to nearby regions. Tracking included.
See our full Shipping Policy.
How do you keep prices fair?
We cut out the middlemen. XRmarine sources directly from quality manufacturers and sells at honest prices. Same OEM-quality parts, no dealership markup. Every order comes with free shipping, real expert support, and a 1-year warranty.
Learn more on our About Us page.
What payment methods do you accept?
We currently accept PayPal — a fast, secure way to pay online. Credit card payments (Visa, Mastercard, American Express) and Shopify Payments are being set up and will be available soon. We appreciate your patience.