Water Pump Impeller Kit 47-43026Q06 for Mercury Mariner 40-250 HP Mercruiser
Water Pump Impeller Kit 47-43026Q06 for Mercury Mariner 40-250 HP Mercruiser
Product Overview
Water pump impeller service kit for Mercury and Mariner outboards from 40 HP to 250 HP and for the MerCruiser Alpha One Gen.2 sterndrive. It replaces Mercury 47-43026Q06, 47-43026Q5, 47-43026T6, 47-43026T7, 47-43026T8, 47-43026T10, 47-43026T11 and 8M0100526, and crosses to Sierra 18-3265. The kit ships with the impeller, the stainless impeller plate, the face seal, the key, two O-rings and every gasket the job needs, so the pump is rebuilt in one pass instead of three orders.
One kit covers both families because Mercury used the same pump cartridge across the 40 to 250 HP outboards and the Alpha One Gen.2 leg. On the outboards the giveaway that the impeller is tired is a weak telltale at idle and a temperature creep on a long plane; on the sterndrive it is a rise in temperature above 2000 rpm, when the leg is finally pumping hard enough to show the drop in flow.
Specifications & Attributes
| Specification | Detail |
|---|---|
| Condition | New / New with tags |
| Type | Water pump impeller service kit |
| Engine Family | Mercury and Mariner outboards 40 HP to 250 HP, MerCruiser Alpha One Gen.2 |
| Horsepower | 35-300 HP range |
| Kit Components | Impeller, plate, face seal and tool, key, O-rings, gaskets, drain screw gaskets |
| Packaging Size | 150 x 100 x 50 mm (5.9 x 3.9 x 2.0 in) |
OEM Cross Reference
| Brand | OEM Part Numbers |
|---|---|
| Mercury | 47-43026Q06 |
| Mercury | 47-43026Q5 |
| Mercury | 47-43026T6 |
| Mercury | 47-43026T7 |
| Mercury | 47-43026T8 |
| Mercury | 47-43026T10 |
| Mercury | 47-43026T11 |
| Mercury | 8M0100526 (also listed as 47-8M0100526) |
| Sierra | 18-3265 kit |
| Sierra | 18-3056 impeller |
| Sierra | 18-3122 impeller plate |
| Quicksilver | 8172761 plate |
| Impeller cross | 19210-ZW1-003, 399289, 391538 |
| Impeller cross | 47-43026T2, 47-430262Q02 |
Compatible Engines: MerCruiser Sterndrive
| Drive | Years | Note |
|---|---|---|
| Alpha One Gen.2 | 1991-1998 and up | Raw water pump in the lower unit |
Compatible Engines: Mercury Mariner Outboards
| Model | Horsepower | Serial Number From |
|---|---|---|
| 4-Stroke Bigfoot, 2.31:1 ratio | 40 HP | T409000 |
| 4-Stroke Bigfoot Bodensee | 45 HP | G231123 |
| SeaPro Marathon Bigfoot | 60 HP | D000750 |
| 4-Stroke Bigfoot | 60 HP | OT178500 |
| 3 cylinder | 70 HP | B110054 |
| 3 cylinder | 75 HP | A996142 |
| 4-Stroke | 75 HP | G9605000 |
| 3 cylinder | 80 HP | A996142 |
| 3 cylinder | 90 HP | B110054 |
| 4-Stroke | 90 HP | G9605000 |
| 4 cylinder | 100 HP | B209468 |
| 4 cylinder | 125 HP | D283222 |
| V-200 DFI | 200 HP | G386496 |
| V-225 3.0L | 225 HP | D280813 |
| V-250 3.0L | 250 HP | G129222 |
What's Included
| Component | Qty | Part Number |
|---|---|---|
| Impeller | 1 | 18-3056 |
| Impeller plate, stainless | 1 | 18-3122 |
| Face seal and fitting tool | 1 | Not published |
| Impeller gasket | 1 | Not published |
| Impeller faceplate gaskets | 2 | Not published |
| Seal rings | 2 | Not published |
| O-rings | 2 | Not published |
| Drain screw gaskets | 2 | Not published |
| Impeller key | 1 | Not published |
Condition & Warranty
| Item | Detail |
|---|---|
| Condition | New / New with tags |
| Warranty | Standard |
| Packaging | Sealed retail packaging |
Before You Buy
- Check the serial number against the table, Mercury changed the pump internals inside this horsepower band
- On an Alpha One Gen.2 confirm the drive is a Gen.2 and not an earlier Alpha One, the pump differs
- Use the face seal tool in the kit, driving the seal without it is the usual cause of a leak
- Replace the impeller plate as well as the impeller, a grooved plate destroys a new impeller quickly
- Lubricate the impeller with glycerine and turn the shaft in its running direction when the housing goes back on
- 30-Day Easy Returns
- Free Worldwide Shipping
Verfügbarkeit für Abholungen konnte nicht geladen werden
Boat Owners' Review
Before You Buy
Frequently Asked Questions
What is your refund policy?
We offer a 14-day hassle-free return on all products. Items must be unused and in original packaging. Every XRmarine part is also covered by our 1-year warranty against manufacturing defects. If something is not right, email us at info@xrmarineparts.com — replacement or full refund, your choice.
See our full Refund Policy for complete details.
How does shipping work?
Free international shipping on every order — no minimums. We operate a global warehouse network with a main distribution centre in Asia (10-20 business days). We also hold stock in regional warehouses across the United States, Germany, the United Kingdom, Australia, and Poland (opening soon) — most orders arrive in 1-3 business days within those countries and in 2-8 business days to nearby regions. Tracking included.
See our full Shipping Policy.
How do you keep prices fair?
We cut out the middlemen. XRmarine sources directly from quality manufacturers and sells at honest prices. Same OEM-quality parts, no dealership markup. Every order comes with free shipping, real expert support, and a 1-year warranty.
Learn more on our About Us page.
What payment methods do you accept?
We currently accept PayPal — a fast, secure way to pay online. Credit card payments (Visa, Mastercard, American Express) and Shopify Payments are being set up and will be available soon. We appreciate your patience.