Water Pump Impeller Kit 6G1-W0078-A1 for Yamaha 6 8 HP Outboard Mariner Sierra 18-3460 6N0-W0078-A0 — Australia Local Warehouse
Water Pump Impeller Kit 6G1-W0078-A1 for Yamaha 6 8 HP Outboard Mariner Sierra 18-3460 6N0-W0078-A0 — Australia Local Warehouse
Product Overview
Water pump impeller kit, a complete pump service part for Yamaha 6 HP and 8 HP two-stroke outboards and for the Mariner 6 HP and 8 HP motors built on the same powerhead, supplied as 8 components with a net weight of 46 g. It replaces Yamaha 6G1-W0078-00, 6G1-W0078-01 and 6G1-W0078-A1, the short kit 6N0-W0078-A0, and Sierra 18-3460. Held in our Australia local warehouse.
The kit is built around the impeller 6G1-44352-00 and carries everything else the pump needs except the housing: the cartridge insert, the cartridge outer plate, two wear plates, the gasket, the water seal and the 4 housing bolts.
On a 6 HP or 8 HP motor the pump is asked to work at displacement speed almost all the time. There is no planing run to force water through, so a tired impeller shows up as a weak telltale at idle long before the engine overheats.
Specifications
| Specification | Detail |
|---|---|
| Condition | New / New with tags |
| Type | Water pump impeller service kit |
| Engine Type | Yamaha and Mariner two-stroke outboards |
| Horsepower | 6 HP and 8 HP (6HP, 8HP) |
| Impeller Part Number | 6G1-44352-00, Sierra 47-11590M |
| Components | 8 items, see list below |
| Net Weight | 46 g |
| Country of Origin | Taiwan |
| Quantity | 1 complete kit |
OEM Cross Reference
| Reference | Part Numbers |
|---|---|
| Yamaha pump kit | 6G1-W0078-00, 6G1-W0078-01 |
| Yamaha pump kit | 6G1-W0078-A1 |
| Yamaha short kit | 6N0-W0078-A0 |
| Sierra | 18-3460 |
| Yamaha impeller | 6G1-44352-00 |
| Sierra impeller | 47-11590M |
| Yamaha cartridge insert | 6G1-44322-00 |
| Yamaha cartridge outer plate | 6G1-44323-00 |
| Yamaha wear plate | 6G1-44328-00 |
Compatible Engines
| Brand | Horsepower | Years |
|---|---|---|
| Yamaha | 6 HP | 1988-2000 |
| Yamaha | 8 HP | 1984 and later |
| Mariner | 6 HP | 1984-1986 |
| Mariner | 8 HP | 1984-1986 |
| Mariner | 8 HP | 2002-2006 on the later 8M suffix models |
Assembly Components
| Component | Qty | Part Number |
|---|---|---|
| Impeller | 1 | 6G1-44352-00 |
| Cartridge insert | 1 | 6G1-44322-00 |
| Cartridge outer plate | 1 | 6G1-44323-00 |
| Wear plate | 2 | 6G1-44328-00 |
| Water pump gasket | 1 | Not published |
| Water seal | 1 | Not published |
| Housing bolt | 4 | Not published |
What's Included
| Component | Qty |
|---|---|
| Water pump gasket | 1 |
| Cartridge insert | 1 |
| Cartridge outer plate | 1 |
| Impeller | 1 |
| Water seal | 1 |
| Wear plate | 2 |
| Hexagon housing bolt | 4 |
Sand, Heat and the Australian Season
| What Happens Here | What It Does to the Pump | What to Do |
|---|---|---|
| Motor run up a sand bank at low tide | Sand scores the impeller tips and the housing liner | Flush and inspect, fit the kit if the tips are worn |
| Shallow estuary with a silt bottom | Abrasive water polishes the wear plates | Two new wear plates are in the kit |
| Boat left on the trailer for the dry season | Blades take a set and lose their curve | Fit a new impeller before the first trip back |
| Summer water temperature over 30 C | Overheating gives little warning at low speed | Check the telltale every trip |
| Motor tilted up for weeks at the ramp | Water drains out, seal dries and weeps | New water seal with the kit |
| Housing bolts corroded from salt air | They round off or snap on removal | Four new bolts supplied |
Fitting Notes
| Step | Action |
|---|---|
| 1 | Check the model suffix and year against the table, the 6 and 8 HP pumps changed across the model runs |
| 2 | Compare the old impeller with 6G1-44352-00, the 4 and 5 HP engines use a different pump |
| 3 | Drain the gearcase and note the blade direction as the housing lifts off |
| 4 | Check the plastic housing for scoring, a grooved housing will wear the new impeller in a season |
| 5 | Lubricate the impeller with glycerine and turn the shaft clockwise as the pump goes back together |
| 6 | Torque the 4 housing bolts evenly, an uneven housing will not hold prime at idle |
| 7 | Run the engine on muffs and check the telltale before leaving the ramp |
| 8 | Flush the motor with fresh water after every saltwater trip |
Condition & Warranty
| Item | Detail |
|---|---|
| Condition | New / New with tags |
| Warranty | Standard |
| Packaging | Sealed retail packaging |
Shipping from Australia
| Destination | Warehouse | Note |
|---|---|---|
| Australia | Australia local warehouse | Domestic delivery, no import duty |
| New Zealand | Australia local warehouse | Short transit, customs may apply |
| Asia Pacific | Australia local warehouse | Tracked air and sea options |
Before You Buy
- Check the engine model suffix and year against the table above, the 6 and 8 HP pumps changed across the model runs
- Compare the old impeller with 6G1-44352-00 before fitting, the 4 and 5 HP engines use a different pump
- Inspect the plastic housing for scoring, a grooved housing will wear the new impeller in a season
- Lubricate the impeller with glycerine and turn the shaft clockwise as the pump goes back together
- Torque the 4 housing bolts evenly, an uneven housing will not hold prime at idle
- This is the pump kit, the plastic housing itself is not included
- 30-Day Easy Returns
- Ships from our Australia local warehouse
Verfügbarkeit für Abholungen konnte nicht geladen werden
Nicht vorrätig
Vollständige Details anzeigen
Boat Owners' Review
Before You Buy
Frequently Asked Questions
What is your refund policy?
We offer a 14-day hassle-free return on all products. Items must be unused and in original packaging. Every XRmarine part is also covered by our 1-year warranty against manufacturing defects. If something is not right, email us at info@xrmarineparts.com — replacement or full refund, your choice.
See our full Refund Policy for complete details.
How does shipping work?
Free international shipping on every order — no minimums. We operate a global warehouse network with a main distribution centre in Asia (10-20 business days). We also hold stock in regional warehouses across the United States, Germany, the United Kingdom, Australia, and Poland (opening soon) — most orders arrive in 1-3 business days within those countries and in 2-8 business days to nearby regions. Tracking included.
See our full Shipping Policy.
How do you keep prices fair?
We cut out the middlemen. XRmarine sources directly from quality manufacturers and sells at honest prices. Same OEM-quality parts, no dealership markup. Every order comes with free shipping, real expert support, and a 1-year warranty.
Learn more on our About Us page.
What payment methods do you accept?
We currently accept PayPal — a fast, secure way to pay online. Credit card payments (Visa, Mastercard, American Express) and Shopify Payments are being set up and will be available soon. We appreciate your patience.