Water Pump Impeller with Key 63V-44352-01 18-3040 for Yamaha 9.9 13.5 15 HP Outboard
Water Pump Impeller with Key 63V-44352-01 18-3040 for Yamaha 9.9 13.5 15 HP Outboard
Product Overview
Water pump impeller with key for the Yamaha 9.9, 13.5 and 15 HP outboards, the impeller and the drive key that turns it. It replaces Yamaha 63V-44352-01 and 63V-44352-00, it also crosses to Sierra 18-3040, it is made in hardened nylon with neoprene rubber blades, and it ships as one impeller and one key in a 150 mm x 180 mm x 190 mm box at 22 g.
This is the impeller for the small four stroke Yamaha range, the 9.9 and 15 HP motors that share the same pump, plus the 13.5 HP F13.5A. The key locks the impeller to the drive shaft, so the pump turns with the motor and not on the shaft.
The hub is hardened nylon and the blades are neoprene rubber. The nylon takes the load where the key sits, which is the part that fails first when a pump has been run dry, even briefly, on muffs with the tap not fully open.
A tired impeller shows as a weak tell tale at idle that picks up once the motor revs, then an engine that runs hot at low speed where the pump does most of its work. Left until the blades let go, the pieces travel up the tube and block the thermostat or the water jacket.
Fitment covers the Yamaha 9.9 HP models 9.9F, 9.9FEMF, 9.9FMH, 9.9MHW, F9.9C, 9.9ESH, 9.9ELH, 9.9ELR, 9.9MLH and 9.9MSH, the 15 HP models 15EMH, 15F, 15MHW, F15A, F15ELH, 15EL, 15ES, 15ML, 15MS, F15EL, F15ES, F15ML and F15MS, the 13.5 HP F13.5A, and the EMH 63V and 63W, with the years set out below. Check the model and serial number on the bracket before ordering.
Specifications
| Specification | Detail |
|---|---|
| Condition | New / New with tags |
| Type | Water pump impeller with key |
| Yamaha Part Number | 63V-44352-01 |
| Also Replaces | 63V-44352-00 |
| Sierra Number | 18-3040 |
| Material | Hardened nylon with neoprene rubber blades |
| Drive Key | Included |
| Fits | Yamaha 9.9, 13.5 and 15 HP outboards, 1995 to 2002 |
| Quantity | 1 impeller and 1 key |
| Net Weight | 22 g including packaging |
| Pack Size | 150 mm x 180 mm x 190 mm |
| Pack Size In Inches | 5.91 in x 7.09 in x 7.48 in |
| Warranty | 3 year |
OEM Cross Reference
| Brand | Part Numbers |
|---|---|
| Yamaha | 63V-44352-01 |
| Yamaha | 63V-44352-00 |
| Sierra | 18-3040 |
Compatible Engines
| Horse Power | Series | Models | Years |
|---|---|---|---|
| 9.9 HP | Yamaha International Motor | 9.9F, 9.9FEMF, 9.9FMH, 9.9MHW, F9.9C | 1995 - 2002 |
| Not stated | Yamaha International Motor | EMH, 63V, 63W | 1995 - 1997 |
| 15 HP | Yamaha International Motor | 15EMH, 15F, 15MHW, F15A, F15ELH | 1995 - 2002 |
| 13.5 HP | Yamaha International Motor | F13.5A | 2002 |
| 9.9 HP | Yamaha Outboards | 9.9ESH, 9.9ELH, 9.9ELR, 9.9MLH, 9.9MSH | 1996 - 1999 |
| 15 HP | Yamaha Outboards | 15EL, 15ES, 15ML, 15MS, F15EL, F15ES, F15ML, F15MS | 1996 - 2001 |
What's Included
| Component | Detail | Qty |
|---|---|---|
| Water pump impeller | Hardened nylon hub, neoprene blades | 1 |
| Drive key | Locks the impeller to the shaft | 1 |
| Pump housing gasket | Not included, replace it with the impeller | 0 |
| Pump liner and plate | Not included, inspect them while the pump is open | 0 |
Key Features
| Feature | Detail |
|---|---|
| OEM replacement | Built to the Yamaha 63V-44352-01 size |
| Key included | The drive key comes in the pack with the impeller |
| Cross referenced | Also listed as 63V-44352-00 and Sierra 18-3040 |
| Hardened nylon hub | Takes the load where the key sits |
| Neoprene blades | The soft part that moves the water |
| 9.9 to 15 HP coverage | Yamaha two and four stroke models, 1995 to 2002 |
Packing Dimensions
| Measure | Millimetres | Inches |
|---|---|---|
| Pack length | 150 mm | 5.91 in |
| Pack width | 180 mm | 7.09 in |
| Pack height | 190 mm | 7.48 in |
| Weight with packaging | 22 g | 0.78 oz |
Signs The Impeller Needs Replacing
| What You See | What It Means | Action |
|---|---|---|
| Weak tell tale at idle | Impeller taking a set | Fit the new impeller and key |
| Engine hot at low speed only | Pump not moving enough water at idle | Fit the new impeller and key |
| No water at all with a rev | Impeller spinning on the shaft | Fit the new impeller and key |
| Rubber pieces in the tell tale | Blades breaking up | Fit the new impeller and key, flush the passages |
| Overheat after running on muffs | Pump run dry and burned the tips | Fit the new impeller and key |
| Two seasons on the impeller | It is a service part | Fit the new impeller and key as routine |
Fitting Notes
| Step | Action |
|---|---|
| 1 | Check the model and serial number against the table above |
| 2 | Take the lower unit off and split the water pump housing |
| 3 | Note the order of the liner, plate and gaskets before they come apart |
| 4 | Slide the old impeller off and take out the old key |
| 5 | Check the key slot in the shaft and the nylon hub for wear |
| 6 | Fit the new key in the shaft, then slide the impeller over it |
| 7 | Bend the blades in the direction of rotation and close the housing |
| 8 | Run the engine on muffs and check the tell tale before use |
Condition & Warranty
| Item | Detail |
|---|---|
| Condition | New / New with tags |
| Warranty | 3 year |
| Packaging | Box, 150 mm x 180 mm x 190 mm |
Before You Buy
- Replaces Yamaha 63V-44352-01 and 63V-44352-00
- Crosses to Sierra 18-3040
- Fits the Yamaha 9.9 HP models listed, 1995 to 2002
- Fits the Yamaha 15 HP models listed, 1995 to 2002
- Fits the Yamaha 13.5 HP F13.5A, 2002
- Hardened nylon hub with neoprene rubber blades
- One impeller and one drive key, 22 g with packaging
- 30-Day Easy Returns
Verfügbarkeit für Abholungen konnte nicht geladen werden
Boat Owners' Review
Before You Buy
Frequently Asked Questions
What is your refund policy?
We offer a 14-day hassle-free return on all products. Items must be unused and in original packaging. Every XRmarine part is also covered by our 1-year warranty against manufacturing defects. If something is not right, email us at info@xrmarineparts.com — replacement or full refund, your choice.
See our full Refund Policy for complete details.
How does shipping work?
Free international shipping on every order — no minimums. We operate a global warehouse network with a main distribution centre in Asia (10-20 business days). We also hold stock in regional warehouses across the United States, Germany, the United Kingdom, Australia, and Poland (opening soon) — most orders arrive in 1-3 business days within those countries and in 2-8 business days to nearby regions. Tracking included.
See our full Shipping Policy.
How do you keep prices fair?
We cut out the middlemen. XRmarine sources directly from quality manufacturers and sells at honest prices. Same OEM-quality parts, no dealership markup. Every order comes with free shipping, real expert support, and a 1-year warranty.
Learn more on our About Us page.
What payment methods do you accept?
We currently accept PayPal — a fast, secure way to pay online. Credit card payments (Visa, Mastercard, American Express) and Shopify Payments are being set up and will be available soon. We appreciate your patience.