Zu Produktinformationen springen
1 von 8

Water Pump Repair Kit Sherwood 23974 Impeller 17000K P1711 P1712 P1730F P1731F

Water Pump Repair Kit Sherwood 23974 Impeller 17000K P1711 P1712 P1730F P1731F

Normaler Preis $186.99 USD
Normaler Preis Verkaufspreis $186.99 USD
Sale Ausverkauft
Versand wird beim Checkout berechnet

Product Overview

Water pump major repair kit for the Sherwood 23974 pump, built around the 17000K impeller. It fits the P1711 up to the P1731F pumps, and it ships as one complete kit in a 160 mm x 120 mm x 90 mm box at 1380 g.

The impeller is 84 mm outside, 20 mm inside and 73 mm deep, with twelve neoprene blades on a key drive shaft. One end is threaded so a puller can draw it out of the housing, which is worth knowing before the first attempt with a screwdriver.

This is a major kit rather than an impeller box: cam and screw, end cover, wear plate, two bearings, lip seal, gasket, O rings, snap rings and washers. A Sherwood pump that has been run with a worn cam or a scored cover will ruin a new impeller, so the cam and the plate are the parts that decide whether the repair lasts.

Fitment covers the Sherwood P1711, P1712, P1716B, P173, P1719, P1719F, P1722B, P1727FB, P1730F and P1731F pumps. Match the pump body number and look for the 23974 casting before ordering.

Specifications

Specification Detail
Condition New / New with tags
Type Water pump major repair kit
Sherwood Pump Number 23974
Impeller Number 17000K
Outer Diameter 84 mm / 3.31 in
Inner Diameter 20 mm / 0.79 in
Width 73 mm / 2.87 in
Number Of Blades 12
Drive Type Key drive
Material Neoprene rubber
Kit Type Major kit, cam, cover, plate, bearings and seals
Net Weight 1380 g including packaging
Pack Size 160 mm x 120 mm x 90 mm
Pack Size In Inches 6.30 in x 4.72 in x 3.54 in
Warranty 3 year

OEM Cross Reference

Brand Part Numbers
Sherwood 23974
Sherwood 23974-SHW
Sherwood 17000K (impeller)
Sherwood pumps P1711, P1712, P1716B, P173, P1719
Sherwood pumps P1719F, P1722B, P1727FB, P1730F, P1731F

Compatible Engines

Pump Model Note
Sherwood P1711 Major repair kit
Sherwood P1712 Major repair kit
Sherwood P1716B Major repair kit
Sherwood P173 Major repair kit
Sherwood P1719 Major repair kit
Sherwood P1719F Major repair kit
Sherwood P1722B Major repair kit
Sherwood P1727FB Major repair kit
Sherwood P1730F Major repair kit
Sherwood P1731F Major repair kit

What's Included

Component Detail Qty
Impeller 17000K, 84 mm x 73 mm, 12 blade 1
Cam and screw Pump cam with fixing screw 1
End cover Pump cover 1
Wear plate Rear wear plate 1
Bearing Pump shaft bearing 2
Lip seal Shaft lip seal 1
Gasket Cover gasket 1
O ring Body O ring 2
Drive key Impeller key 1
Snap ring Retaining ring 3
Washer Cover washer 3

Signs The Pump Needs A Major Kit

What You See What It Means What To Do
Weak raw water flow Impeller blades set or worn Fit the kit
New impeller fails in weeks Cam or wear plate scored Fit the major kit, both are in the box
Water from the pump seal Lip seal failed Fit the kit
Shaft wobble or rumble Bearings worn Fit the kit, two bearings are in the box
Rubber pieces in the strainer Impeller breaking up Fit the kit and flush the system
Pump hot to touch Bearing or cam wear Fit the kit

Fitting Notes

Step Action
1 Check the pump model and the 23974 casting before ordering
2 Close the sea cock and drain the pump
3 Take the end cover screws out and lift the cover away
4 Use the threaded end of the impeller with a puller, and watch for the retaining ring
5 Take the cam and wear plate out and check the housing bore
6 Fit the new cam, wear plate and lip seal
7 Fit the key and slide the new impeller on, folding the blades with rotation
8 Fit the gasket, O rings and cover, then the bearings if the shaft was out
9 Open the sea cock, run the engine and check flow and leaks

Condition & Warranty

Item Detail
Condition New / New with tags
Warranty 3 year
Packaging Boxed, 160 mm x 120 mm x 90 mm

Before You Buy

  • Major repair kit for the Sherwood 23974 pump
  • Includes the 17000K impeller, 84 mm x 73 mm, 12 blades
  • Fits Sherwood P1711, P1712, P1716B, P173 and P1719
  • Fits Sherwood P1719F, P1722B, P1727FB, P1730F and P1731F
  • Cam, end cover, wear plate, 2 bearings and seals all in the box
  • Impeller is threaded at one end for a puller
  • 1380 g with packaging, box 160 mm x 120 mm x 90 mm
  • 30-Day Easy Returns
Anzahl

Vollständige Details anzeigen

Before You Buy

Frequently Asked Questions

What is your refund policy?

We offer a 14-day hassle-free return on all products. Items must be unused and in original packaging. Every XRmarine part is also covered by our 1-year warranty against manufacturing defects. If something is not right, email us at info@xrmarineparts.com — replacement or full refund, your choice.

See our full Refund Policy for complete details.

How does shipping work?

Free international shipping on every order — no minimums. We operate a global warehouse network with a main distribution centre in Asia (10-20 business days). We also hold stock in regional warehouses across the United States, Germany, the United Kingdom, Australia, and Poland (opening soon) — most orders arrive in 1-3 business days within those countries and in 2-8 business days to nearby regions. Tracking included.

See our full Shipping Policy.

How do you keep prices fair?

We cut out the middlemen. XRmarine sources directly from quality manufacturers and sells at honest prices. Same OEM-quality parts, no dealership markup. Every order comes with free shipping, real expert support, and a 1-year warranty.

Learn more on our About Us page.

What payment methods do you accept?

We currently accept PayPal — a fast, secure way to pay online. Credit card payments (Visa, Mastercard, American Express) and Shopify Payments are being set up and will be available soon. We appreciate your patience.