Flexible Impeller Kit 40 mm 22405-0001 09-808B 875583 for Jabsco Johnson Volvo Penta Westerbeke Onan Fischer Panda 32620 46622 132-0310 — Germany Local Warehouse
Flexible Impeller Kit 40 mm 22405-0001 09-808B 875583 for Jabsco Johnson Volvo Penta Westerbeke Onan Fischer Panda 32620 46622 132-0310 — Germany Local Warehouse
Product Overview
Flexible impeller kit for pumps built on the small pin drive body, 40 mm outside diameter, 19 mm wide, 12 mm shaft, 6 neoprene blades with a brass insert, supplied with a gasket and an O-ring in a 15 x 10 x 3 cm pack. It replaces Jabsco 22405-0001, Johnson 09-808B, Volvo Penta 875583, Westerbeke 32620, Onan 132-0310 and Fischer Panda J009-46840. Shipped from our Germany local warehouse.
Most of these kits in Germany go into genset and auxiliary diesel pumps rather than outboards: Fischer Panda and Onan sets on motor cruisers, Bukh and BMW diesels in inland boats, Westerbeke pulley drive pumps. On a long river passage the generator often runs for hours unattended, which is why the cooling impeller is worth carrying as a spare.
The drive is a pin in the shaft, not a key or a spline. The pin and its slot in the hub wear together, so a new impeller on a worn pin will slip and stop moving water even though the blades look perfect.
Specifications
| Specification | Detail |
|---|---|
| Condition | New / New with tags |
| Type | Flexible impeller kit |
| Drive Type | Pin drive, slotted shaft |
| Blades | 6 |
| Outer Diameter | 40 mm (1.57 in) |
| Width | 19 mm (0.74 in) |
| Shaft Diameter | 12 mm (0.47 in) |
| Material | Neoprene |
| Insert Material | Brass |
| Kit Parts | Impeller, gasket, O-ring |
| Country of Origin | Taiwan |
| Pack Size | 15 x 10 x 3 cm |
OEM Cross Reference
| Brand | Part Numbers |
|---|---|
| Jabsco | 22405-0001, 22405-0001-P, 4528-0001, 4528-0003 |
| Johnson | 09-808B, 09-45589 |
| Volvo Penta | 875583, 833995, 3586496, 21951344 |
| Westerbeke | 32620, 032620, 32680, 46622 |
| Fischer Panda | J009-46840 |
| Onan | 132-0310, 132-0311, 132-0284, 132-0336 |
| CEF | 500121 |
| Maze | 80161 |
| JMP | 7000-01 |
| DJ Pump | 08-31-0601 |
| Bukh | DV series cooling pump |
| BMW | D7, D12 |
Compatible Engines
| Brand | Model or Pump | Note |
|---|---|---|
| Jabsco | Pumps 52010-2001, 52010-2051, 29300-2201C | Jabsco pump bodies |
| Johnson | F35B Duo, F35B FWP, F35B SWP | Pumps 10-24638-01, 10-24638-02, 10-24638-03 |
| Johnson | F35B-8, F35B-802, F35B-8007, F35B-8027 | F35 pump family |
| Volvo Penta | Pumps 840557, 858065, 807368 | Petrol engine cooling pumps |
| Volvo Penta | Pumps 833415, 833522, 833883 | Petrol engine cooling pumps |
| Westerbeke | Models 46120, K34A, K34M, 45765 | Pulley drive pump |
| Bukh | DV8ME, DV8SME, DV10LME, DV10LSME, DV10M | Marine diesel |
| Bukh | DV10ME, DV10SME, DV18LME, DV18LSME | Marine diesel |
| Bukh | DV20M, DV20ME, DV20SME, DV24ME, DV24SME | Marine diesel |
| Fischer Panda | Panda 14 000 NE PMS Kubota | Generator set |
| Fischer Panda | Panda 3.8 ND PMS FAR, Panda 4.5 ND PMS FAR | Generator set |
| Fischer Panda | Panda 4500 FCB, SCB, SCE PMS FAR | Generator set |
| Fischer Panda | Panda 5000 LPE PMS Kubota, PMS 4 FAR | Generator set |
| BMW | D7, D12 | Marine diesel cooling pump |
| Onan | MDKUB 5, 6, 7.5 and 9 KW | Generator set cooling pump |
What's Included
| Component | Qty |
|---|---|
| Flexible impeller, 6 blade | 1 |
| Gasket | 1 |
| O-ring | 1 |
Gensets and Auxiliary Diesels
| Situation | Why This Kit | Point to Check |
|---|---|---|
| Generator runs for hours at anchor | Impeller runs dry less, but runs long and hot | Cover plate scoring |
| Fischer Panda set with Kubota engine | J009-46840 pump body | Pin and slot wear |
| Onan MDKUB set | 132-0310 and 132-0311 pumps | Gasket seating face |
| Bukh or BMW inland diesel | Small pin drive body | Shaft size, 12 mm |
| Volvo petrol engine cooling pump | 875583 and 833995 bodies | Cam wear inside the housing |
| Winter lay up on the hard | Rubber takes a set over months | Fit in spring, not autumn |
| Long river or canal cruise | No chandlery for a hundred kilometres | Carry a spare kit on board |
Fitting Notes
| Step | Action |
|---|---|
| 1 | Measure the old impeller at 40 mm outside and 19 mm wide, the neighbouring body takes a 51 mm and will not seal |
| 2 | Check the pin and the slot in the hub, a worn pin slips and the pump stops moving water |
| 3 | Check the shaft is 12 mm, the same casting was built with other shaft sizes |
| 4 | Inspect the cover plate and the cam for scoring, a grooved plate loses flow whatever the impeller |
| 5 | Lubricate with glycerine or soap, never grease or oil on neoprene |
| 6 | Fold the blades in the direction of rotation as the cover goes on |
| 7 | Open the seacock and confirm flow at the outlet before loading the engine or the genset |
| 8 | Carry the old kit as a pattern and keep one spare on board for a long passage |
Condition & Warranty
| Item | Detail |
|---|---|
| Condition | New / New with tags |
| Warranty | Standard |
| Packaging | Sealed retail packaging |
Shipping from Germany
| Destination | Warehouse | Note |
|---|---|---|
| Germany | Germany local warehouse | Domestic delivery, no import duty |
| Austria, Netherlands, Belgium | Germany local warehouse | EU delivery, no customs charge |
| Other EU destinations | Germany local warehouse | EU delivery, VAT included |
Before You Buy
- Measure the old impeller at 40 mm outside and 19 mm wide before ordering
- Check the pin and the slot in the hub, a worn pin slips on a new impeller
- Check the shaft is 12 mm, the same casting was built with other shaft sizes
- Inspect the cover plate and cam for scoring
- Lubricate with glycerine or soap only, never grease or oil on neoprene
- This is the impeller, gasket and O-ring kit, the pump body and cover plate are not included
- 30-Day Easy Returns
- Ships from our Germany local warehouse
Verfügbarkeit für Abholungen konnte nicht geladen werden
Nicht vorrätig
Vollständige Details anzeigen
Boat Owners' Review
Before You Buy
Frequently Asked Questions
What is your refund policy?
We offer a 14-day hassle-free return on all products. Items must be unused and in original packaging. Every XRmarine part is also covered by our 1-year warranty against manufacturing defects. If something is not right, email us at info@xrmarineparts.com — replacement or full refund, your choice.
See our full Refund Policy for complete details.
How does shipping work?
Free international shipping on every order — no minimums. We operate a global warehouse network with a main distribution centre in Asia (10-20 business days). We also hold stock in regional warehouses across the United States, Germany, the United Kingdom, Australia, and Poland (opening soon) — most orders arrive in 1-3 business days within those countries and in 2-8 business days to nearby regions. Tracking included.
See our full Shipping Policy.
How do you keep prices fair?
We cut out the middlemen. XRmarine sources directly from quality manufacturers and sells at honest prices. Same OEM-quality parts, no dealership markup. Every order comes with free shipping, real expert support, and a 1-year warranty.
Learn more on our About Us page.
What payment methods do you accept?
We currently accept PayPal — a fast, secure way to pay online. Credit card payments (Visa, Mastercard, American Express) and Shopify Payments are being set up and will be available soon. We appreciate your patience.